Furuno manual ETR-30N and ETR-6/10N

Page 32

2.3.2 ETR-30N and ETR-6/10N

When installing an ETR-30N and an ETR-6/10N, the ETR-6/10N’s host name of SOUNDER cannot be changed. For this reason, the set the HOST NAME control of the ETR-30N to “1” and its host name to “SOUNDER1.” Turn the ETR-30N off and on again after setting the HOST NAME control to register settings.

1.Set tappings of ETR-30N as in paragraph 2.2.1.

2.Set the HOST NAME control of the ETR-30N to “1” and turn on the power.

3.As shown in paragraph 2.2.2, set sounder source for “SOUNDER1” on the NavNet display unit as below.

a)Rotate the [ENTER] knob to choose SOUNDER SOURCE.

b)Press the EDIT soft key.

c)Enter SOUNDER1 with the numeric keys.

d)Press the RETURN soft key.

Note: The HOST NAME control setting and sounder source name (numeric) must agree. (See the table below.) If not, the equipment cannot function.

4. Set the ETR-30N as shown in paragraph 2.2.3.

HOST NAME

SOUNDER SOURCE set

control setting

on NavNet display unit

on ETR-30N

 

1

SOUNDER1

Note: The host name and frequency on the ETR-6/10N are fixed to SOUNDER and 50/200 kHz, respectively.

Change sounder

 

Turn power

source to "SOUNDER1."

 

off to set.

NavNet

NavNet

NavNet

Display Unit 1

Display Unit 2

Display Unit 3

Set up

 

 

HUB

transducer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ETR-30N

 

 

ETR-6/10N

 

HOST NAME: 1

 

 

 

 

 

 

 

Installation with ETR-30N and ETR-6/10N

If the ETR-6/10N is generating interference, use the interference rejector on the NavNet display unit to reject it. If that does not work, contact your dealer for advice.

14

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents Single network sounder System ConfigurationSystem configuration, single network sounder Multiple network sounders System configuration, two ETR-30NSystem configuration, ETR-30N + ETR-6/10N Equipment Lists Standard supplyOptional supply Name Type Code No Qty Remarks1kW transducer Available transducersVii Viii 1kW transducer con’t2kW transducer 3kW transducer 3kW transducer con’t Xii 1kW/2kW transducer1kW/3kW transducer Xiii1kW/2kW transducer con’t Xiv 1kW/3kW transducer con’t200B-12H 3 k 88/150 Steel 88B-8 Xvi 2kW/3kW transducerXvii 3kW/2kW transducer con’tMounting procedure Mounting dimensions for the network sounderMounting Network SounderContents of piggyback mount kit How to assemble the piggyback mount kitTransducer Stacking unitsWIRING, Setup WiringStandard installation Connection of network sounderGround How to attach connector to transducer cableTransducer Connection of multiple network sounders Network HUBNetwork sounder ETR-30N, top view, cover removed Settings for Single Network SounderInternal settings Sounder source setting FurunoSimulation mode window Network setup menuHost Name Transducer setupSounder setup Frequency options Frequency setup screenTransducer type setting method options Transducer type setting options Frequency input screenSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N Erasing Transducer Setting ETR-30N, cover removedNetwork sounder ETR-30N OPERATION, MaintenanceControls Choosing pulse repetition rate PRR Sounder system setup menuAdditions to NavNet Series Operator’s Manual Replacing Fuses Transducer frequencyAll Clear CPU BoardThis page is intentionally left blank Transducer, thru-hull pipe and tank list Appendix NEW BLT TransducersAP-1 Settings AP-2ETR-30N Ｌｉｓｔ Ｐａｃｋｉｎｇ Ｌｉｓｔ Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.
Top Page Image Contents