Furuno RD-30 manual Choosing Units of Measurement, Km, Km/H, Units setup menu, Unit options

1. OPERATION

1.9Choosing Units of Measurement

You may choose the units of measurement for water temperature, distance/speed, depth and wind speed as follows:

1.Press the [MENU] key once or twice to display the main menu.

2.Select UNITS and then press the [ENT] key.

	UNITS SETUP
TEMP	:		XX.XX
		F
DIST/SPD :		NM, KT
DEPTH	: FT
WIND SPD: KT
WIND	: OFF TRUE

Units setup menu

3.Select TEMP, DIST/SPD, DEPTH or WIND SPD and WIND (wind speed averaging and wind direction reference) as appropriate and then press the [ENT] key. One of the following displays appears depending on the selection you made.

C

F

XX.XX

XX.X

Temperature

unit options

	NM, KT			M		KT		OFF
	KM, KM/H			FT		KM/H		1MIN
	SM, MPH					MPH		5MIN	TRUE
				FA
				PB		M/S		10MIN	APP
Distance/speed
	unit options
		Depth unit			Wind speed		Wind averaging, wind
			options		unit options		direction reference options

Unit options

4.Use the cursor pad to select unit desired and then press the [ENT] key. For items other than WIND, go to step 5. For WIND, do the following:

a)Choose an averaging time and then press the [ENT] key. Wind speed is averaged every two seconds during the period chosen. This setting also is effective for the graph and graphic displays and the wind speed shown by pressing the [*] key.

b)Press the [ENT] key again.

c)Choose TRUE or APPARENT and then press the [ENT] key.

TRUE: The speed and direction of the wind felt or measured when stationary.

APPARENT: The direction and speed of the wind as it appears to those on board, relative to the speed and direction of the boat; combination of the true wind and the wind caused by the boat's movement.

5. Press the [MENU] key twice to close the menu.

1-23