Furuno RD-30 manual When Battery ALARM! Appears, LCD Check screen, Exchange battery window

Page 41

2. MAINTENANCE, TROUBLESHOOTING

8.The equipment beeps and then displays the following message to inform you that it is now going to check the LCD:

<LCD CHECK>

ALL ON 2 SEC.

ALL OFF 3 SEC.

LCD CHECK screen

9.The LCD is checked and then the entire test is repeated. To stop the test, turn off the power.

2.4When BATTERY ALARM! Appears

A lithium battery (type: CR2354-1F2, code no.: 000-142-305) is installed on the circuit board inside the display unit, and it preserves data when the power is turned off. The life of the battery is about 3-5 years. When its voltage is low BATTERY ALARM! appears on the display to alert you. When this happens, have a qualified technician replace the battery, following the procedure below.

1.Press the [MENU] key once or twice to open the menu.

2Select SYS SETUP and then press the [ENT] key.

SYSTEM SETUP

TIME DISP : 24HOUR

BRG READ : MAGNETIC

MAG VAR. : AUTO E00

SIMULATOR: OFF

TEST?

EXCHANGE BATTERY?

SYSTEM SETUP menu

3.Select EXCHANGE BATTERY? and then press the [ENT] key. The display shows the following message:

EXCHANGE

BATTERY?

ARE YOU SURE?

YES

NO

Exchange battery window

4.Press ◄ to select YES and then press the [ENT] key. The following display appears. (At this time, the contents of the RAM are temporarily moved to the flash memory.)

2-3

Image 41
Contents Multi Display 00080917705 Safety Instructions Table of Contents Foreword FeaturesWord to the Owner of the RD-30 Multi Display IiiFuruno RD-30 OperationControls Turning On/Off the Power 210.2 Graph displays Sample displaysGraphic displays Graphic displaysHighway display Highway displayZoom window User display setup menu Setting up the DisplaysChoosing display type Main menuSetting up digital displays Digital display options Setting up graph displaysGraph display options window Graph display setup menusStart From + Graph setup menusGraphic display options window Setting up graphic displaysSpeedometer and water temperature graphic menus Rx data display Displaying Rx DataAudio alarm type AlarmsALARM1 menu Buzzer options windowLOW High Insde Outsd Shear Speed alarmDepth alarm Arrival alarm, anchor watch alarm How the XTE alarm works XTE Cross Track Error alarmTrip alarm Countdown alarm Odometer alarmTime alarm Messages display Alarm messagesMessages Reset Resetting Indications to ZeroReset menu Windows for resetting trip, odometer and graph displaysChoosing Units of Measurement Units setup menuKM, KM/H Unit optionsOffsets menu Applying an Offset to DataOffsets Choosing Time Display Format System Setup menu12HOUR Time display optionsPosition format options TD setup optionsChoosing Position Data Format 14 I/O Port Setup Simulation ModePorts Setup menu IN/OUT, AUX and Power OUT optionsBearing Reference IN/PUT and AUX Both Setup menuTrue BRG Read optionsMAG VAR. options Magnetic VariationManual HDG Sensor Setup Heading Sensor PG-1000, C-2000 SetupHDG Setup menu CalibrationCalibration results CalibrationCalibration prompt Damping options OffsetDamping C-2000 MAINTENANCE, Troubleshooting Test display Diagnostic TestTest Start screen LCD Check screen When Battery ALARM! AppearsExchange battery window Clearing Backup Data Menu Tree ALARM1SYS Setup GRI Loran C/ a ChainsChain Location Code Decca ChainsRD-30 Furuno Specifications of MULTI-DISPLAYThis page is intentionally left blank Index-1 Index

RD-30 specifications

The Furuno RD-30 is a multifunctional marine display unit designed for navigating and managing various marine data effectively. As a robust and reliable product from a reputable manufacturer known for its innovative nautical technologies, the RD-30 is a favored choice among sailors and boaters around the world.

One of the main features of the RD-30 is its ability to integrate with multiple Furuno systems, allowing for seamless data sharing and control. The device can display information from GPS, radar, and other instruments, providing a comprehensive view of the vessel’s navigation status. This integration not only simplifies the navigation process but also enhances safety by combining critical data points into a single display.

The RD-30 is equipped with a user-friendly interface that facilitates easy operation. Its clear and bright LCD display delivers excellent visibility in various lighting conditions. The large font sizes and intuitive menu structure make it easy for users to access essential information quickly, ensuring that they can focus on navigation without distractions.

Another significant characteristic of the RD-30 is its versatility. It features various display modes, allowing users to customize how they view their navigation data. Whether it’s speed, distance traveled, or water depth, the RD-30 can present information in a format that best suits the user’s needs. Additionally, the unit supports multiple languages, catering to a diverse user base.

Technologically, the RD-30 embodies Furuno's commitment to innovation. It utilizes advanced sensor technology, leveraging data from external instruments to provide real-time updates. The device can also interface with NMEA 0183 and NMEA 2000 networks, which broadens integration possibilities with other onboard electronics.

Moreover, the RD-30 features a lightweight design which makes it easy to mount on various vessels, from small recreational boats to larger yachts. Its compact form factor does not compromise functionality, as it remains packed with essential features for avid sailors.

In conclusion, the Furuno RD-30 stands out for its multifunctionality, ease of use, and robust integration capabilities. Designed for both amateur and experienced mariners, the RD-30 enhances navigational safety and efficiency, making it an indispensable tool in modern marine travel. As technology continues to evolve, the RD-30 remains a testament to Furuno's dedication to quality and innovation in the maritime industry.