Furuno RD-30 manual Clearing Backup Data

Page 42

2. MAINTENANCE, TROUBLESHOOTING

READY FOR

BATTERY CHANGE.

PRESS ANY KEY

TO SHUT DOWN.

Battery exchange confirmation window

5.Press any key to shut down the equipment.

6.Have a qualified technician replace the battery.

2.5Clearing Backup Data

You may clear all backup data (menu settings, trip, graph and odometer readings, etc.) to start afresh.

1.Press the [MENU] key once or twice to open the main menu.

2.Select RESET and then press the [ENT] key.

3.Select ALL BACKUP DATA? and then press the [ENT] key.

ERASE ALL BACKUP

DATA? (DEFAULT)

ARE YOU SURE?

YES NO

Prompt for erasure of backup data

4.Press ◄ to select YES and then press the [ENT] key. The following display appears.

RESTART FOR

ERASING DATA.

HIT ANY KEY.

Prompt for restarting

5.Hit any key to erase all backup data. A beep sounds and then backup data is cleared.

2-4

Image 42

Contents Multi Display 00080917705 Safety Instructions Table of Contents Word to the Owner of the RD-30 Multi Display FeaturesForeword IiiFuruno Operation ControlsRD-30 Turning On/Off the Power 210.2 Sample displays Graph displaysGraphic displays Graphic displaysHighway display Highway displayZoom window Choosing display type Setting up the DisplaysUser display setup menu Main menuSetting up digital displays Setting up graph displays Digital display optionsGraph display setup menus Graph display options windowGraph setup menus Start From +Setting up graphic displays Speedometer and water temperature graphic menusGraphic display options window Displaying Rx Data Rx data displayALARM1 menu AlarmsAudio alarm type Buzzer options windowSpeed alarm LOW High Insde Outsd ShearDepth alarm Arrival alarm, anchor watch alarm XTE Cross Track Error alarm Trip alarmHow the XTE alarm works Odometer alarm Time alarmCountdown alarm Alarm messages MessagesMessages display Reset menu Resetting Indications to ZeroReset Windows for resetting trip, odometer and graph displaysKM, KM/H Units setup menuChoosing Units of Measurement Unit optionsApplying an Offset to Data OffsetsOffsets menu 12HOUR System Setup menuChoosing Time Display Format Time display optionsTD setup options Choosing Position Data FormatPosition format options Ports Setup menu Simulation Mode14 I/O Port Setup IN/OUT, AUX and Power OUT optionsTrue IN/PUT and AUX Both Setup menuBearing Reference BRG Read optionsMagnetic Variation ManualMAG VAR. options HDG Setup menu Heading Sensor PG-1000, C-2000 SetupHDG Sensor Setup CalibrationCalibration Calibration promptCalibration results Offset Damping C-2000Damping options MAINTENANCE, Troubleshooting Diagnostic Test Test Start screenTest display When Battery ALARM! Appears Exchange battery windowLCD Check screen Clearing Backup Data ALARM1 Menu TreeSYS Setup Loran C/ a Chains GRIDecca Chains Chain Location CodeFuruno Specifications of MULTI-DISPLAY RD-30This page is intentionally left blank Index Index-1

RD-30 specifications

The Furuno RD-30 is a multifunctional marine display unit designed for navigating and managing various marine data effectively. As a robust and reliable product from a reputable manufacturer known for its innovative nautical technologies, the RD-30 is a favored choice among sailors and boaters around the world.

One of the main features of the RD-30 is its ability to integrate with multiple Furuno systems, allowing for seamless data sharing and control. The device can display information from GPS, radar, and other instruments, providing a comprehensive view of the vessel’s navigation status. This integration not only simplifies the navigation process but also enhances safety by combining critical data points into a single display.

The RD-30 is equipped with a user-friendly interface that facilitates easy operation. Its clear and bright LCD display delivers excellent visibility in various lighting conditions. The large font sizes and intuitive menu structure make it easy for users to access essential information quickly, ensuring that they can focus on navigation without distractions.

Another significant characteristic of the RD-30 is its versatility. It features various display modes, allowing users to customize how they view their navigation data. Whether it’s speed, distance traveled, or water depth, the RD-30 can present information in a format that best suits the user’s needs. Additionally, the unit supports multiple languages, catering to a diverse user base.

Technologically, the RD-30 embodies Furuno's commitment to innovation. It utilizes advanced sensor technology, leveraging data from external instruments to provide real-time updates. The device can also interface with NMEA 0183 and NMEA 2000 networks, which broadens integration possibilities with other onboard electronics.

Moreover, the RD-30 features a lightweight design which makes it easy to mount on various vessels, from small recreational boats to larger yachts. Its compact form factor does not compromise functionality, as it remains packed with essential features for avid sailors.

In conclusion, the Furuno RD-30 stands out for its multifunctionality, ease of use, and robust integration capabilities. Designed for both amateur and experienced mariners, the RD-30 enhances navigational safety and efficiency, making it an indispensable tool in modern marine travel. As technology continues to evolve, the RD-30 remains a testament to Furuno's dedication to quality and innovation in the maritime industry.