Furuno RD-30 manual MAINTENANCE, Troubleshooting

Page 39

2.MAINTENANCE, TROUBLESHOOTING

WARNING

Do not open the equipment.

Only qualified personnel should work inside the equipment.

2.1Maintenance

Check the following points regularly to maintain performance:

•Check that connections on the rear panel are firmly tightened and free of dust.

•Check that the ground system is free of rust and the ground wire is tightly fastened.

•Dust and dirt on the display unit can be removed with a soft cloth. Do not use chemical cleaners to clean the display unit – they can remove paint and markings.

2.2Error Messages

In addition to the alarm messages mentioned in Chapter 1, the RD-30 displays the following messages to alert you to possible trouble.

Message

Meaning, Remedy

 

 

BACKUP ERROR DATA!

RAM data corrupted. Try to clear backup

 

data, referring to paragraph 2.5.

 

 

BATTERY ALARM!

Voltage of internal battery is low. Have a

 

qualified technician replace the battery,

 

following the procedure in paragraph 2.4.

 

 

RAM ERROR!

Request service.

 

 

ROM ERROR!

Request service.

 

 

2-1

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Multi Display 00080917705 Safety Instructions Table of Contents Iii FeaturesForeword Word to the Owner of the RD-30 Multi DisplayFuruno Operation ControlsRD-30 Turning On/Off the Power 210.2 Graph displays Sample displaysGraphic displays Graphic displaysHighway display Highway displayZoom window Main menu Setting up the DisplaysUser display setup menu Choosing display typeSetting up digital displays Digital display options Setting up graph displaysGraph display options window Graph display setup menusStart From + Graph setup menusSetting up graphic displays Speedometer and water temperature graphic menusGraphic display options window Rx data display Displaying Rx DataBuzzer options window AlarmsAudio alarm type ALARM1 menuLOW High Insde Outsd Shear Speed alarmDepth alarm Arrival alarm, anchor watch alarm XTE Cross Track Error alarm Trip alarmHow the XTE alarm works Odometer alarm Time alarmCountdown alarm Alarm messages MessagesMessages display Windows for resetting trip, odometer and graph displays Resetting Indications to ZeroReset Reset menuUnit options Units setup menuChoosing Units of Measurement KM, KM/HApplying an Offset to Data OffsetsOffsets menu Time display options System Setup menuChoosing Time Display Format 12HOURTD setup options Choosing Position Data FormatPosition format options IN/OUT, AUX and Power OUT options Simulation Mode14 I/O Port Setup Ports Setup menuBRG Read options IN/PUT and AUX Both Setup menuBearing Reference TrueMagnetic Variation ManualMAG VAR. options Calibration Heading Sensor PG-1000, C-2000 SetupHDG Sensor Setup HDG Setup menuCalibration Calibration promptCalibration results Offset Damping C-2000Damping options MAINTENANCE, Troubleshooting Diagnostic Test Test Start screenTest display When Battery ALARM! Appears Exchange battery windowLCD Check screen Clearing Backup Data Menu Tree ALARM1SYS Setup GRI Loran C/ a ChainsChain Location Code Decca ChainsRD-30 Furuno Specifications of MULTI-DISPLAYThis page is intentionally left blank Index-1 Index

RD-30 specifications

The Furuno RD-30 is a multifunctional marine display unit designed for navigating and managing various marine data effectively. As a robust and reliable product from a reputable manufacturer known for its innovative nautical technologies, the RD-30 is a favored choice among sailors and boaters around the world.

One of the main features of the RD-30 is its ability to integrate with multiple Furuno systems, allowing for seamless data sharing and control. The device can display information from GPS, radar, and other instruments, providing a comprehensive view of the vessel’s navigation status. This integration not only simplifies the navigation process but also enhances safety by combining critical data points into a single display.

The RD-30 is equipped with a user-friendly interface that facilitates easy operation. Its clear and bright LCD display delivers excellent visibility in various lighting conditions. The large font sizes and intuitive menu structure make it easy for users to access essential information quickly, ensuring that they can focus on navigation without distractions.

Another significant characteristic of the RD-30 is its versatility. It features various display modes, allowing users to customize how they view their navigation data. Whether it’s speed, distance traveled, or water depth, the RD-30 can present information in a format that best suits the user’s needs. Additionally, the unit supports multiple languages, catering to a diverse user base.

Technologically, the RD-30 embodies Furuno's commitment to innovation. It utilizes advanced sensor technology, leveraging data from external instruments to provide real-time updates. The device can also interface with NMEA 0183 and NMEA 2000 networks, which broadens integration possibilities with other onboard electronics.

Moreover, the RD-30 features a lightweight design which makes it easy to mount on various vessels, from small recreational boats to larger yachts. Its compact form factor does not compromise functionality, as it remains packed with essential features for avid sailors.

In conclusion, the Furuno RD-30 stands out for its multifunctionality, ease of use, and robust integration capabilities. Designed for both amateur and experienced mariners, the RD-30 enhances navigational safety and efficiency, making it an indispensable tool in modern marine travel. As technology continues to evolve, the RD-30 remains a testament to Furuno's dedication to quality and innovation in the maritime industry.
Top Page Image Contents