Furuno RD-30 manual Offset, Damping C-2000, Damping options

Page 38

1. OPERATION

Offset

If there is a difference between sensor bearing and actual bearing, enter it as below. For example, if the sensor shows 70° and the actual bearing is 75°, enter +5(°).

10.Choose OFFSET and press the [ENT] key.

11.Use ▲ or ▼ to choose minus or plus respectively, whichever is appropriate.

12.Press ► to shift the cursor one place.

13.Use ▲ or ▼ to enter appropriate value.

14.Press ► to shift the cursor one place.

15.Use ▲ or ▼ to enter appropriate value.

16.Press the [ENT] key.

17.Press the [MENU] key twice to finish, or go to step 15 to enter damping factor (C-2000).

Damping (C-2000)

Damping determines how sensitively the sensor responds to change of ship’s heading. Use a small value for faster response.”1” is the default setting. Note that damping value must be received from the C-2000 to display the item DAMPING on the HDG SETUP menu.

18.Choose DAMPING and press the [ENT] key.

0

1

2

3

Damping options

19.Choose damping value. The larger the number the slower the response.

20.Press the [ENT] key.

21.Press the [MENU] key twice to close the menu.

1-32

Image 38
Contents Multi Display 00080917705 Safety Instructions Table of Contents Word to the Owner of the RD-30 Multi Display FeaturesForeword IiiFuruno RD-30 OperationControls Turning On/Off the Power 210.2 Sample displays Graph displaysGraphic displays Graphic displaysHighway display Highway displayZoom window Choosing display type Setting up the DisplaysUser display setup menu Main menuSetting up digital displays Setting up graph displays Digital display optionsGraph display setup menus Graph display options windowGraph setup menus Start From +Graphic display options window Setting up graphic displaysSpeedometer and water temperature graphic menus Displaying Rx Data Rx data displayALARM1 menu AlarmsAudio alarm type Buzzer options windowSpeed alarm LOW High Insde Outsd ShearDepth alarm Arrival alarm, anchor watch alarm How the XTE alarm works XTE Cross Track Error alarmTrip alarm Countdown alarm Odometer alarmTime alarm Messages display Alarm messagesMessages Reset menu Resetting Indications to ZeroReset Windows for resetting trip, odometer and graph displaysKM, KM/H Units setup menuChoosing Units of Measurement Unit optionsOffsets menu Applying an Offset to DataOffsets 12HOUR System Setup menuChoosing Time Display Format Time display optionsPosition format options TD setup optionsChoosing Position Data Format Ports Setup menu Simulation Mode14 I/O Port Setup IN/OUT, AUX and Power OUT optionsTrue IN/PUT and AUX Both Setup menuBearing Reference BRG Read optionsMAG VAR. options Magnetic VariationManual HDG Setup menu Heading Sensor PG-1000, C-2000 SetupHDG Sensor Setup CalibrationCalibration results CalibrationCalibration prompt Damping options OffsetDamping C-2000 MAINTENANCE, Troubleshooting Test display Diagnostic TestTest Start screen LCD Check screen When Battery ALARM! AppearsExchange battery window Clearing Backup Data ALARM1 Menu TreeSYS Setup Loran C/ a Chains GRIDecca Chains Chain Location CodeFuruno Specifications of MULTI-DISPLAY RD-30This page is intentionally left blank Index Index-1

RD-30 specifications

The Furuno RD-30 is a multifunctional marine display unit designed for navigating and managing various marine data effectively. As a robust and reliable product from a reputable manufacturer known for its innovative nautical technologies, the RD-30 is a favored choice among sailors and boaters around the world.

One of the main features of the RD-30 is its ability to integrate with multiple Furuno systems, allowing for seamless data sharing and control. The device can display information from GPS, radar, and other instruments, providing a comprehensive view of the vessel’s navigation status. This integration not only simplifies the navigation process but also enhances safety by combining critical data points into a single display.

The RD-30 is equipped with a user-friendly interface that facilitates easy operation. Its clear and bright LCD display delivers excellent visibility in various lighting conditions. The large font sizes and intuitive menu structure make it easy for users to access essential information quickly, ensuring that they can focus on navigation without distractions.

Another significant characteristic of the RD-30 is its versatility. It features various display modes, allowing users to customize how they view their navigation data. Whether it’s speed, distance traveled, or water depth, the RD-30 can present information in a format that best suits the user’s needs. Additionally, the unit supports multiple languages, catering to a diverse user base.

Technologically, the RD-30 embodies Furuno's commitment to innovation. It utilizes advanced sensor technology, leveraging data from external instruments to provide real-time updates. The device can also interface with NMEA 0183 and NMEA 2000 networks, which broadens integration possibilities with other onboard electronics.

Moreover, the RD-30 features a lightweight design which makes it easy to mount on various vessels, from small recreational boats to larger yachts. Its compact form factor does not compromise functionality, as it remains packed with essential features for avid sailors.

In conclusion, the Furuno RD-30 stands out for its multifunctionality, ease of use, and robust integration capabilities. Designed for both amateur and experienced mariners, the RD-30 enhances navigational safety and efficiency, making it an indispensable tool in modern marine travel. As technology continues to evolve, the RD-30 remains a testament to Furuno's dedication to quality and innovation in the maritime industry.