Furuno MU-150C manual Desktop mounting, Mounting base lower

Desktop mounting

The display unit can be mounted on a desktop, using the optional bracket (Type: FP10-02510, Code No.: 001-414-510).

1.Fasten the mounting base (lower) to the mounting location with four sets of hex head bolts, spring washers, flat washers and nuts.

Hex Head Bolt

Spring Washer

Flat Washer

Nut

FRONT

Mounting base (lower)

2.Fasten the bracket and mounting plate to the mounting base (upper) with 12 hex head bolts. Fasten the mounting plate at the rear for 9° tilt, or at the front for 20° tilt.

Hanger	Hanger
Mounting Plate	Mounting Plate
Mounting Base	Mounting Base
(upper)	(upper)

REAR

FRONT

9 degree TILT 20 degree TILT

Fastening bracket and mounting plate to mounting base (upper)

3