Furuno MU-150C manual Safety Instructions

Page 3

SAFETY INSTRUCTIONS

Safety Instructions for the Operator

Safety Instructions for the Installer

WARNING

Do not open the equipment.

Only qualified personnel should work inside

the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Use the proper fuse.

Fuse rating is shown on the equipment. Use of a wrong fuse can result in damage to the equipment.

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

CAUTION

A warning label is attached to the equipment. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer.

WARNING

Name: Warning Label (2)

Type: 03-129-1001

To avoid electrical shock, do not

remove cover. No user-serviceable

Code No.: 100-236-741

parts inside.

 

About the TFT LCD

The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The remaining 0.015% of the pixels may drop out or blink, how- ever this is not an indication of malfunc- tion.

WARNING

Do not open the cover unless totally familiar with electrical circuits and service manual.

Improper handling can result in electrical shock.

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can result in fire, electrical shock or damage to the equip- ment.

CAUTION

Ground the equipment to prevent mutual interference.

Observe the following compass safe distances to prevent interference to a magnetic compass:

 

Standard

Steering

 

compass

compass

 

 

 

MU-200C

1.55 m

1.05m

 

 

 

Locate the MU-150C out of direct sun- light for optimum viewing.

When lifting the display unit, hold it together with the cover.

Grasping by the cover alone may allow the display unit to fall, resulting in possible injury or damage to the equipment.

i

Image 3
Contents MULTI-PURPOSE LCD Display Page Safety Instructions Table of Contents Iii FeaturesForeword Word to the Owner of the MU-150CConnectable equipment System ConfigurationEquipment Lists Standard supplyOption Mounting Display UnitFlush mounting Display unit and cover Mounting dimensionsDesktop mounting Mounting base lowerFastening bracket and mounting plate to mounting base upper Connection of cables at the rear of the display unit Fastening the front panelFastening the mounting base lower to the display unit Hood option Display unit, how to attach Velcro tapesWiring Wiring External EquipmentGeneral-purpose monitor Display unit, rear view, wiring using specialty cables Connecting FCV-1200 series and CH-250Sub connector Rear panel AC type AdjustmentsAbout the picture adjustment buttons Picture AdjustmentRGB Adjustment Brilliance AdjustmentJumper blocks Display unit OperationFuse replacement MAINTENANCE, TroubleshootingMaintenance Routine maintenanceTroubleshooting table TroubleshootingAppendix AP-1Display unit, rear view AP-2 Power assyAP-3 AP-4 Location of power switch and pcb 10P3879MU-150C Specifications of MULTI-PURPOSE LCD DisplayThis page is intentionally left blank Packing List MU-150C-H-AC-CS Page Page Page Page Page Page Page Page Page 00080923101