Carrier Access 770-0125-AB Logging In With the Web Browser Interface GUI, Enter

Page 57

Configuration

Logging In With the Web Browser Interface (GUI)

Logging In With the Web Browser Interface (GUI)

You can access the BROADway GUI using these minimum versions of the Microsoft or Netscape web browsers:

!Netscape Communicator 4.6 and above with Java 1.3.0_01 or later

!Microsoft Internet Explorer 5.0 and above with Java 1.3.0_01 or later

When you initially connect to the BROADway system using the web browser interface, the system determines which version of Java you are running. If your Java software needs to be upgraded and your PC is connected to the Internet, the applet will download an updated version of Java software. If you are not connected to the Internet and you are notified that you need to upgrade your Java software, you can access and install it from the BROADway software CD. The U.S. English only version of the Java software is located on the CD in the /java/english directory, and the international version is located in the /java/international directory. Double-click the appropriate installer file (.exe) and follow the instructions the installer provides.

NOTE: The GUI interface is designed to operate as a Java applet that is self-contained within the BROADway system and downloaded to the PC-based browser interface when accessed. If the management PC is connected remotely to the BROADway system through a low-speed WAN connection (for example 64Kbps), then the applet might take several minutes to install.

To connect to the BROADway system using the GUI:

1.On your PC, open a web browser window.

2.Type the IP address or domain name of the BROADway system (for example, http:// 192.168.5.10, or http:// 169.254.0.1) and press

ENTER.

3.To save time in the future, store the URL as an entry in the Favorites section of your browser.

NOTE: If you are using Internet Explorer, the Site shown in the login window comes from the domain name of the system, and the Realm is always Carrier Access.

4.Type your user name in the User Name field, initially CUSTOMER.

5.Type your password in the Password field, initially BROADWAY.

NOTE: User names and passwords are case sensitive.

BROADway - Release 4.00

3-9

Image 57
Contents BROADway Page Safety of Information Technology Equipment ComplianceFCC Requirements, Part Network Card Service Framing CodingType JackIndustry Canada CS-03 Industry Canada ICES-003English FrenchSafety Information Electrostatic Discharge ESD Precautions Warranty Limitation of Warranty & Limitation of RemediesWarranty Product Returns Sun Microsystems, Inc., Software Notice Third-Party Software NoticesPreface Table of Contents Table of Contents ConfigurationIndex Ports and CablesXiv BROADway Release Chapter Overview Installation Top I/O Panel Front View of the Bits Chassis Chassis OverviewTop I/O Panel Front View of the ITU Chassis Mounting the Chassis in a Rack Mounting the Chassis in a RackSide View of the Chassis Extension Plate Cabling Power and GroundGround at power source 48 VDC Connect to +24VDC or -48VDC power sourceBROADway Chassis Rear Panel View Connect to Earth ground+24 VDC Feed +24 VDC Ground at power sourceCabling the Ethernet Port Cabling the Serial Craft PortConnect to the serial port of a PC Connect an Ethernet cable from a PC to ETH-1Cabling the Network Synchronization Port Cabling the Clock Ports on the Bits ChassisConnect a second clock source Connect a clock source Cabling the Clock Ports on the ITU Chassis Cabling the Alarm PortsPin Name Alarm Input SensingAlarm Output Reporting Installing the NSP101 Control CardAlarm Cut Off ACO Insert one or two NSP101 cardsActive Green LED Status Module Red LED Module Green LED Status Top BottomAlarm SUM Red LED Status PWR Red LED #2 PWR Red LED #1 Status Top BottomETH Yellow LED Status Top #1 Bottom Insert NIP400 cards optional Installing the NIP400 Line Interface CardCabling the NIP400 ClipConnect to DSX panels or punch down blocks Port LED Port State NIP400 LED IndicatorsInstalling the NHP160 Line Interface Card Cabling and Inserting the NHP160 Line Interface CardGrommets Insert NHP160 cards optional A y NHP160 LED IndicatorsBSP200 line terminations Installing the BSP200 Line Interface CardBSP200 LED Indicators Cabling the BSP200Connect BNC coaxial cables Interface Red LED Interface Green Status Bottom LED Top Installing OSP155/ESP155/BCP155 Line Interface Cards Insert OSP155, ESP155, or BCP155 cards optionalGrommets Cabling the OSP155 and BCP155 Installation Cabling the ESP155 OSP155, BCP155, and ESP155 LED IndicatorsAttaching the Front Panel W a y Applying Power to the ChassisMaintaining BROADway Hardware Installing New CardsReplacing Failed Cards Installing Additional OSP155, ESP155 or BCP155 CardsFan Board Maintaining the Fan TrayConfiguration Configuration Assigning an IP Address to the BROADway System Default BROADway IP AddressACT-USERNSP1234CUSTOMER,BROADWAY Assigning a Different IP AddressPS#configure PSNSP-config#no interface bvi PS#configurePS#show bvi status PS#show BVI status bridge-group numberViewing Serial Craft Port Settings With the GUI Management Access to the BROADway SystemLocal SCP-1 Serial Craft Port Access Remote Modem SCP-1 Serial Craft Port AccessEthernet Port Web Browser GUI Access Ethernet Port Command Line AccessEnter Logging In With the Web Browser Interface GUIConfiguration Configuration This window must remain running in the background Click here to minimize this windowACT-USERNSP1234username,password Logging In With the Command Line Interface CLIACT-USERNSP1234 CANC-USERNSP1234Setting Up User Accounts User Account Management Using the GUI RTRV-USERNSP1234ALL User Account Management Using TL1RTRV-USERNSP1234ACTIVE RTRV-USERNSP1234MEDLT-USERNSP1234username ENT-USERNSP1234joetech,mypassword,ADMIN,TL1Changing Your Password Using the GUI Changing Your PasswordChanging Your Password Using TL1 Current Password field, type your current passwordSetting the Date and Time Using the GUI Setting the System Date and TimeSetting the Date and Time Using TL1 ED-DATNSP1234YY-MM-DD,HH-MM-SSSetting System Node Parameters Using the GUI Setting System Node ParametersRTRV-UDATANSP1234 Setting System Node Parameters Using TL1Examples ED-UDATANSP1234USRTRV-EQPTNSP-x.PWR-11234 ED-EQPTNSP1234ENAED-EQPTNSP1234DIS Managing the BROADway Configuration Database Managing the Database Using the GUI RTRV-DBNSP1 Managing the Database Using TL1CPY-DBNSP1RUNNING,SAVED,newdbname CPY-DBNSP1SAVED,offlinenameExporting the BROADway Database to a TL1 Script Copying Files Between NSP101 Controllers Re-Starting the BROADway System Using TL1INIT-SYSNSP1234ALL Using FTP with the BROADway SystemUpgrading System Software Rtrv-sw-vernsp1234allNSP1 rtrv-sw-vernsp1234all \ftp Ftp cd /FLASHFtp put c\temp\bw308.zip Set-upgrade command NSP1 set-upgradensp1234bw308 NSP1 set-upgradensp1234bw308,allUpgrading the Boot ROM Rolling Back a Software UpdateNSP1 init-sysnsp1234FORCE NSP1 exec-sysnsp1234bootUpdateRTRV-SW-VERNSP1234ALL TL1 Software Upgrade CommandsAppendix a SCP-1 SCP-2 future use Pin Signal Name SCP-1 and SCP-2 Connector PinoutsETH-1 ETH-2 Pin Signal ETH-1 and ETH-2 Connector PinoutsPin Signal CKIN-1 and CKIN-2 Connector Pinouts Bits OnlyT1/E1 NIP400 TX tip TX ring RX tip RX ring Circuit Card NIP400 Connector Pinouts NIP TX1-RX1, NIP TX2-RX2Ports and Cables Pin Color Name Signal Alarms Connector PinoutsScsi Pin Color Signal NHP160 Connector PinoutsPorts and Cables Ports and Cables Index Index BROADway Release Index Index