Carrier Access 770-0125-AB Setting the System Date and Time, Setting the Date and Time Using TL1

Configuration

Setting the System Date and Time

Setting the System Date and Time

The BROADway system maintains a real-time clock to assist in ensuring event and alarm times are properly recorded in the system. This section describes how to set the real-time clock from the GUI and command line interfaces.

Setting the Date and Time Using the GUI

To set the date and time on the BROADway system:

1.In the menu bar, click Config, then Date & Time.

2.In the Date & Time window, enter the date and time.

-To set the BROADway system to the same date and time as your workstation, click Set to Today.

-Alternately, enter the date and time you require using the Year, Month, Day, Hour, and Minute fields.

3.Click OK.

Setting the Date and Time Using TL1

To view the system date and time, use the RTRV-DATTL1 command:

RTRV-DAT::NSP:1234::;

To change the system date and time, use the ED-DATcommand:

ED-DAT::NSP:1234::YY-MM-DD,HH-MM-SS;

YY-MM-DD—The two-digit year, month, and day of the system date.

HH-MM-SS—The time (24-hour clock) of the system.

For example:

ED-DAT::NSP:1234::03-07-01,15-35-00;

This command changes the date to July 1, 2003 and the time to 3:35 PM.

BROADway - Release 4.00 3-19