Edimax Technology Broadband Router manual Password Settings, Remote Management

Page 19

2.1.2 Password Settings

You can change the password required to log into the broadband router's system web-based management. By default, there is no password. So please assign a password to the Administrator as soon as possible, and store it in a safe place. Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive.

Parameters

Description

 

Enter your current password for the remote management administrator to login to your

Current Password

Broadband router.

 

Note: By default there is NO password

New Password

Enter your new password

 

Enter your new password again for verification purposes

Confirmed Password

Note: If you forget your password, you’ll have to reset the router to the factory default

 

(No password) with the reset button (see router’s back panel)

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.1.3 Remote Management

The remote management function allows you to designate a host in the Internet the ability to configure the Broadband router from a remote site. Enter the designated host IP Address in the Host IP Address field.

 

Parameters

 

Description

 

 

 

This is the IP address of the host in the Internet that will have

 

 

 

management/configuration access to the Broadband router from a remote site. This

 

 

 

means if you are at home and your home IP address has been designated the Remote

 

 

 

Management host IP address for this router (located in your company office), then you

 

Host Address

 

are able to configure this router from your home. If the Host Address is left 0.0.0.0 this

 

 

means anyone can access the router’s web-based configuration from a remote

 

 

 

 

 

 

location, providing they know the password.

 

 

 

Click the Enabled box to enable the Remote Management function.

 

 

 

Note: When you want to access the web-based management from a remote site, you

 

 

 

must enter the router’s WAN IP address (e.g. 10.0.0.1) into your web-browser followed

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User’s Manual Page Page Minimum Requirements FeaturesPackage Content IntroductionUSB Front PanelLight Status Description Getting started Setup DiagramConfigure your PC to obtain an IP address automatically ∙ DNS Configuration Select Disable DNS2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTGeneral Setup Chapter Quick Setup Wizard ChapterStatus Info Chapter Based on your selection Quick SetupTime Zone Broadband TypeThis Protocol only used for Australia’s ISP connection Cable ModemMenu Description Your ISP will automatically give you an IP addressFixed-IP xDSL MTU PPPoEThis is the ID given by ISP. This is optional Connecting to the Pptp serverPptp Connection IDWill not auto-connect to the ISP Connecting to the L2TP serverL2TP Internet exceeds the Idle TimeServer manually IP of the Login ServerTelstra Big Pond Idle Time OutGeneral Settings Below Router default the Time Server Address isSystem On your selectionRemote Management Password SettingsPptp WANL2TP 5 L2TP Dynamic IPStatic IP Address PPPoE PPP over EthernetLAN DdnsLAN IP WirelessSetting Basic SettingsEssid Iapp Advanced SettingsWMM WEP only Security3.2 802.1x only Password used by external Radius server3.3 802.1x WEP Static key WPA2AES WPA Pre-shared keyWPA Radius WpatkipQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT Port Forwarding ALG SettingSupport these types of applications Range of ports to be forward to the private IP Between the Virtual Server and the DMZ settingsDescription of this setting Virtual ServerExample Virtual Server Special ApplicationsTCP Example Special ApplicationsExample UDPALG Settings UPnP SettingsUPnP Feature Disable Network address of destination LAN Static RoutingFirewall Before your routing rules take effectTo a particular IP address in your LAN Certain Internet applicationsDoS ActivitiesClick Reset to clear all fields Just click ResetInternet services that use these ports Click Apply Changes to save the settingClear the selection and re-select again, just click Reset DoS Denial of ServiceExample Access Control Enable/disable URL BlockingISP 4 DMZNAS System Print ServerIPP Neighborhood GeneralSet the host name that shows in network neighborhood Set which network neighborhood group that you want to joinShare Input the share name Add/Edit ShareFill the share comments for this share item here Client automatically Read and Write, Read Only, or Don’t share by defaultAdvanced NAS ToolsThis Page shows the status of attached USB storage devices NAS StatusEXT2 All to remove all partitionsThis shows free space of the specified partition Partition names of the USB storage deviceSize Total available space of this partition Total spaceStatus and Information StatusVersion Whether the Dhcp Server function is enabled/disabledAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsReset Firmware UpgradeMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Http TCP Pptp TCP FTP Smtp POP3Snmp Snmp Trap

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.
Top Page Image Contents