Edimax Technology Broadband Router manual Add/Edit Share, Input the share name

Page 45

Add/Edit Share

 

Parameters

 

Description

 

Share

 

Input the share name.

 

 

 

 

 

Path

 

Click on “Open” to open the path selecting window to select the sharing folder. Or click

 

 

share all USB disks to share whole disks.

 

 

 

 

 

 

 

 

 

 

Select the user that can access this shared folder and press “Add” to add into list or press

 

Users

 

“Add All” to add all users into list. You also can select the users in “Share Users” and click

 

 

 

on “Del” to remove from the list or press “Del All” to remove all users from list.

 

 

 

 

 

Authority

 

Select the access right of this sharing. You can select “Read Only” for read only sharing or

 

 

 

select “Read & Write” to give users full access right.

 

 

 

 

 

Comment

 

Fill the share comments for this share item here.

 

 

 

 

 

Shared to

 

Selecting the share method that you want to use. You can share via FTP or share via

 

 

 

neighborhood.

Click <Save> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

NOTE: Each user can only have one FTP share; it’s restricted to add two or more FTP shares to the same user.

NOTE: For a partition which owns NTFS file system, you can follow below procedures to share them.

(i)Switch to “NAS System -> Advanced” page”.

(ii)Check on “Read Only” to give read authority on the NTFS partition and save it.

Open Dialog

When you click the “Open” button, you can see the following pop-up window that shows the USB storage devices. Please select the USB devices from left panel, the right bottom panel will show the directories in this USB storage device. Choose the folder you want to share, and click “Submit” to select this folder for sharing. You can also click “New Folder” to create a new share folder.

NOTE: Only the folders in USB storage devices will be shown as icons in Open Dialog due to the share function is restricted to folders, not files.

44

Image 45
Contents User’s Manual Page Page Package Content FeaturesIntroduction Minimum RequirementsFront Panel USBLight Status Description Configure your PC to obtain an IP address automatically Setup Diagram∙ DNS Configuration Select Disable DNS Getting started2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTQuick Setup Wizard Chapter General Setup ChapterStatus Info Chapter Time Zone Quick SetupBroadband Type Based on your selectionMenu Description Cable ModemYour ISP will automatically give you an IP address This Protocol only used for Australia’s ISP connectionFixed-IP xDSL MTU PPPoEPptp Connecting to the Pptp serverConnection ID This is the ID given by ISP. This is optionalL2TP Connecting to the L2TP serverInternet exceeds the Idle Time Will not auto-connect to the ISPTelstra Big Pond IP of the Login ServerIdle Time Out Server manuallyGeneral Settings System Router default the Time Server Address isOn your selection BelowRemote Management Password SettingsWAN PptpL2TP Static IP Address Dynamic IPPPPoE PPP over Ethernet 5 L2TPLAN DdnsLAN IP WirelessBasic Settings SettingEssid Advanced Settings IappWMM WEP only SecurityPassword used by external Radius server 3.2 802.1x only3.3 802.1x WEP Static key WPA Radius WPA Pre-shared keyWpatkip WPA2AESQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT ALG Setting Port ForwardingSupport these types of applications Description of this setting Between the Virtual Server and the DMZ settingsVirtual Server Range of ports to be forward to the private IPExample Virtual Server Special ApplicationsExample Example Special ApplicationsUDP TCPUPnP Settings ALG SettingsUPnP Feature Disable Firewall Static RoutingBefore your routing rules take effect Network address of destination LANDoS Certain Internet applicationsActivities To a particular IP address in your LANInternet services that use these ports Just click ResetClick Apply Changes to save the setting Click Reset to clear all fieldsExample Access Control DoS Denial of ServiceEnable/disable URL Blocking Clear the selection and re-select again, just click ResetISP 4 DMZPrint Server NAS SystemIPP Set the host name that shows in network neighborhood GeneralSet which network neighborhood group that you want to join NeighborhoodShare Add/Edit Share Input the share nameFill the share comments for this share item here Advanced Read and Write, Read Only, or Don’t share by defaultNAS Tools Client automaticallyEXT2 NAS StatusAll to remove all partitions This Page shows the status of attached USB storage devicesSize Total available space of this partition Partition names of the USB storage deviceTotal space This shows free space of the specified partitionStatus and Information StatusWhether the Dhcp Server function is enabled/disabled VersionAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsFirmware Upgrade ResetMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Snmp TCP FTP Smtp POP3Snmp Trap Http TCP Pptp

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.