Edimax Technology Broadband Router manual Quick Setup Wizard Chapter, General Setup Chapter

Page 9

Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will automatically give your LAN clients an IP address. By default the Broadband Router’s DHCP server is enabled so that you can obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN. If there is another DHCP on your network, then you’ll need to switch one of the DHCP servers off. (To disable the Broadband router’s DHCP server see chapter 2 LAN Port)

1)Once your PC has obtained an IP address from your router, enter the default IP address 192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

The login screen below will appear. Enter the “User Name” and “Password” and then click <OK> to login.

Note: By default the user name is “admin” and the password is “1234”. For security reasons it is recommended that you change the password as soon as possible (in General setup/system/password, see chapter 2)

2)The HOME page screen below will appear. The Home Page is divided into four sections, Quick Setup Wizard, General Setup, Status Info and System Tools.

Quick Setup Wizard (Chapter 1)

Select your Internet connection type and then input the configurations needed to connect to your Internet Service Provider (ISP).

General Setup (Chapter 2)

This section contains configurations for the Broadband router’s advance functions such as: Address Mapping, Virtual Server, Access Control, Hacker Attack Prevention, DMZ, Special applications and other functions to meet your LAN requirements.

Status Info (Chapter 3)

In this section you can see the Broadband router's system information, Internet Connection, Device Status, System Log, Security Log and DHCP client information.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User’s Manual Page Page Package Content FeaturesIntroduction Minimum RequirementsFront Panel USBLight Status Description Configure your PC to obtain an IP address automatically Setup Diagram∙ DNS Configuration Select Disable DNS Getting started2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTQuick Setup Wizard Chapter General Setup ChapterStatus Info Chapter Time Zone Quick SetupBroadband Type Based on your selectionMenu Description Cable ModemYour ISP will automatically give you an IP address This Protocol only used for Australia’s ISP connectionFixed-IP xDSL MTU PPPoEPptp Connecting to the Pptp serverConnection ID This is the ID given by ISP. This is optionalL2TP Connecting to the L2TP serverInternet exceeds the Idle Time Will not auto-connect to the ISPTelstra Big Pond IP of the Login ServerIdle Time Out Server manuallyGeneral Settings System Router default the Time Server Address isOn your selection BelowRemote Management Password SettingsWAN PptpL2TP Static IP Address Dynamic IPPPPoE PPP over Ethernet 5 L2TPLAN DdnsLAN IP WirelessBasic Settings SettingEssid Advanced Settings IappWMM WEP only SecurityPassword used by external Radius server 3.2 802.1x only3.3 802.1x WEP Static key WPA Radius WPA Pre-shared keyWpatkip WPA2AESQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT ALG Setting Port ForwardingSupport these types of applications Description of this setting Between the Virtual Server and the DMZ settingsVirtual Server Range of ports to be forward to the private IPExample Virtual Server Special ApplicationsExample Example Special ApplicationsUDP TCPUPnP Settings ALG SettingsUPnP Feature Disable Firewall Static RoutingBefore your routing rules take effect Network address of destination LANDoS Certain Internet applicationsActivities To a particular IP address in your LANInternet services that use these ports Just click ResetClick Apply Changes to save the setting Click Reset to clear all fieldsExample Access Control DoS Denial of ServiceEnable/disable URL Blocking Clear the selection and re-select again, just click ResetISP 4 DMZPrint Server NAS SystemIPP Set the host name that shows in network neighborhood GeneralSet which network neighborhood group that you want to join NeighborhoodShare Add/Edit Share Input the share nameFill the share comments for this share item here Advanced Read and Write, Read Only, or Don’t share by defaultNAS Tools Client automaticallyEXT2 NAS StatusAll to remove all partitions This Page shows the status of attached USB storage devicesSize Total available space of this partition Partition names of the USB storage deviceTotal space This shows free space of the specified partitionStatus and Information StatusWhether the Dhcp Server function is enabled/disabled VersionAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsFirmware Upgrade ResetMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Snmp TCP FTP Smtp POP3Snmp Trap Http TCP Pptp

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.
Top Page Image Contents