Edimax Technology Broadband Router manual Advanced Settings, Iapp, Wmm

Page 25

2.4.2 Advanced Settings

You can set advanced wireless LAN parameters of this router. The parameters include Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, preamble Type …… You should not change these parameters unless you

know what effect the changes will have on this router.

 

Parameters

 

Description

 

Fragment Threshold

 

"Fragment Threshold" specifies the maximum size of packet during the fragmentation of

 

 

data to be transmitted. If you set this value too low, it will result in bad performance.

 

 

 

 

RTS Threshold

 

When the packet size is smaller the RTS threshold, the wireless router will not use the

 

 

RTS/CTS mechanism to send this packet.

 

 

 

 

Beacon Interval

 

The interval of time that this wireless router broadcast a beacon. Beacon is used to

 

 

synchronize the wireless network.

 

 

 

 

 

 

 

 

DTIM Period

 

The DTIM period you specify here indicates how often the clients served by this access

 

 

point should check for buffered data still on the AP awaiting pickup.

 

 

 

 

 

 

 

 

Data Rate

 

The “Data Rate” is the rate this access point uses to transmit data packets. The access

 

 

point will use the highest possible selected transmission rate to transmit the data packets.

 

 

 

 

 

 

 

 

Preamble Type

 

The “Long Preamble” can provide better wireless LAN compatibility while the “Short

 

 

Preamble” can provide better wireless LAN performance.

 

 

 

 

 

 

 

 

 

 

If you enable “Broadcast ESSID”, every wireless station located within the coverage of

 

Broadcast ESSID

 

this access point can discover this access point easily. If you are building a public

 

 

wireless network, enabling this feature is recommended. Disabling “Broadcast ESSID”

 

 

 

 

 

 

can provide better security.

 

 

 

 

 

IAPP

 

If you enable “IAPP”, it will allow wireless station roaming between IAPP enabled access

 

 

points within the same wireless LAN.

 

 

 

 

 

 

It is recommended to enable the protection mechanism. This mechanism can decrease

 

CTS Protect

 

the rate of data collision between 802.11b and 802.11g wireless stations. When the

 

 

protection mode is enabled, the throughput of the AP will be a little lower due to many of

 

 

 

 

 

 

frame traffic should be transmitted.

 

 

 

 

 

Tx Power

 

You can adjust the wireless transmit power here. By reduce the tx power can let the

 

 

wireless signal only cover your working area.

 

 

 

 

Turbo Mode

 

By enable the turbo mode can enhance the throughput up to 35Mbps.

 

 

 

 

 

 

 

WMM stands for Wi-Fi Multimedia. It is a standard created to define quality of service

 

WMM

 

(QoS) in Wi-Fi networks. This adds prioritized capabilities to Wi-Fi networks and

 

 

optimizes their performance when multiple concurring applications, each with different

 

 

 

 

 

 

latency and throughput requirements, compete for network resources.

 

 

 

 

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router.

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents User’s Manual Page Page Package Content FeaturesIntroduction Minimum RequirementsUSB Front PanelLight Status Description Configure your PC to obtain an IP address automatically Setup Diagram∙ DNS Configuration Select Disable DNS Getting started2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTGeneral Setup Chapter Quick Setup Wizard ChapterStatus Info Chapter Time Zone Quick SetupBroadband Type Based on your selectionMenu Description Cable ModemYour ISP will automatically give you an IP address This Protocol only used for Australia’s ISP connectionFixed-IP xDSL MTU PPPoEPptp Connecting to the Pptp serverConnection ID This is the ID given by ISP. This is optionalL2TP Connecting to the L2TP serverInternet exceeds the Idle Time Will not auto-connect to the ISPTelstra Big Pond IP of the Login ServerIdle Time Out Server manuallyGeneral Settings System Router default the Time Server Address isOn your selection BelowRemote Management Password SettingsPptp WANL2TP Static IP Address Dynamic IPPPPoE PPP over Ethernet 5 L2TPLAN DdnsLAN IP WirelessSetting Basic SettingsEssid Iapp Advanced SettingsWMM WEP only Security3.2 802.1x only Password used by external Radius server3.3 802.1x WEP Static key WPA Radius WPA Pre-shared keyWpatkip WPA2AESQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT Port Forwarding ALG SettingSupport these types of applications Description of this setting Between the Virtual Server and the DMZ settingsVirtual Server Range of ports to be forward to the private IPExample Virtual Server Special ApplicationsExample Example Special ApplicationsUDP TCPALG Settings UPnP SettingsUPnP Feature Disable Firewall Static RoutingBefore your routing rules take effect Network address of destination LANDoS Certain Internet applicationsActivities To a particular IP address in your LANInternet services that use these ports Just click ResetClick Apply Changes to save the setting Click Reset to clear all fieldsExample Access Control DoS Denial of ServiceEnable/disable URL Blocking Clear the selection and re-select again, just click ResetISP 4 DMZNAS System Print ServerIPP Set the host name that shows in network neighborhood GeneralSet which network neighborhood group that you want to join NeighborhoodShare Input the share name Add/Edit ShareFill the share comments for this share item here Advanced Read and Write, Read Only, or Don’t share by defaultNAS Tools Client automaticallyEXT2 NAS StatusAll to remove all partitions This Page shows the status of attached USB storage devicesSize Total available space of this partition Partition names of the USB storage deviceTotal space This shows free space of the specified partitionStatus and Information StatusVersion Whether the Dhcp Server function is enabled/disabledAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsReset Firmware UpgradeMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Snmp TCP FTP Smtp POP3Snmp Trap Http TCP Pptp

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.
Top Page Image Contents