Edimax Technology Broadband Router manual Wan, Pptp, L2TP

Page 20

by port number 8080, e.g. 10.0.0.1:8080 (see below). You’ll also need to know the password set in the Password Setting screen in order to access the router’s web- based management.

Port

The port number of remote management web interface.

Enabled

Select “Enabled” to enable the remote management function.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change your Internet connection type. The WAN Settings screen allows to specify the type of WAN port connect you want to establish with your ISP. The WAN settings offer the following selections for the router’s WAN port, Dynamic IP, Static IP Address, PPPoE, PPTP, L2TP, Telstra Big Pond, DNS and DDNS.

 

Parameters

 

Description

 

Dynamic IP

 

Your ISP will automatically give you an IP address

 

 

 

 

 

Static IP

 

Your ISP has given you an IP address already

 

 

 

 

 

PPPoE

 

Your ISP requires PPPoE connection.

 

 

 

 

 

PPTP

 

Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.

 

 

 

 

 

L2TP

 

Your ISP requires L2TP connection.

 

 

 

 

 

Telstra Big Pond

 

Your ISP requires Telstra Big Pond connection.

 

 

 

 

 

DNS

 

You can specify a DNS server that you wish to use

 

 

 

 

 

DDNS

 

You can specify a DDNS server that you wish to use and configure the user name and

 

 

password provided by you DDNS service provider.

 

 

 

 

 

 

 

Once you have made a selection, click <More Configuration> at the bottom of the screen and proceed to the manual’s relevant sub-section

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents User’s Manual Page Page Features Package ContentIntroduction Minimum RequirementsLight Status Description Front PanelUSB Setup Diagram Configure your PC to obtain an IP address automatically∙ DNS Configuration Select Disable DNS Getting started2b Windows XP 2c Windows2d Windows NT ∙ IP Address Select Obtain an IP address from a Dhcp serverStatus Info Chapter Quick Setup Wizard ChapterGeneral Setup Chapter Quick Setup Time ZoneBroadband Type Based on your selectionCable Modem Menu DescriptionYour ISP will automatically give you an IP address This Protocol only used for Australia’s ISP connectionFixed-IP xDSL PPPoE MTUConnecting to the Pptp server PptpConnection ID This is the ID given by ISP. This is optionalConnecting to the L2TP server L2TPInternet exceeds the Idle Time Will not auto-connect to the ISPIP of the Login Server Telstra Big PondIdle Time Out Server manuallyGeneral Settings Router default the Time Server Address is SystemOn your selection BelowPassword Settings Remote ManagementL2TP WANPptp Dynamic IP Static IP AddressPPPoE PPP over Ethernet 5 L2TPDdns LANWireless LAN IPEssid Basic SettingsSetting WMM Advanced SettingsIapp Security WEP only3.3 802.1x WEP Static key Password used by external Radius server3.2 802.1x only WPA Pre-shared key WPA RadiusWpatkip WPA2AESAccess Control QoSUncheck Enable QoS to disable QoS function for the WAN port Edit QoS RuleNAT Support these types of applications ALG SettingPort Forwarding Between the Virtual Server and the DMZ settings Description of this settingVirtual Server Range of ports to be forward to the private IPSpecial Applications Example Virtual ServerExample Special Applications ExampleUDP TCPUPnP Feature Disable UPnP SettingsALG Settings Static Routing FirewallBefore your routing rules take effect Network address of destination LANCertain Internet applications DoSActivities To a particular IP address in your LANJust click Reset Internet services that use these portsClick Apply Changes to save the setting Click Reset to clear all fieldsDoS Denial of Service Example Access ControlEnable/disable URL Blocking Clear the selection and re-select again, just click Reset4 DMZ ISPIPP Print ServerNAS System General Set the host name that shows in network neighborhoodSet which network neighborhood group that you want to join NeighborhoodShare Fill the share comments for this share item here Add/Edit ShareInput the share name Read and Write, Read Only, or Don’t share by default AdvancedNAS Tools Client automaticallyNAS Status EXT2All to remove all partitions This Page shows the status of attached USB storage devicesPartition names of the USB storage device Size Total available space of this partitionTotal space This shows free space of the specified partitionStatus Status and InformationAs well as the Primary DNS and Secondary DNS being used Whether the Dhcp Server function is enabled/disabledVersion System Log Statistics Configuration Tools ToolMay start using the router again Firmware UpgradeReset How to Manually find your PC’s IP and MAC address Appendix aGlossary TCP FTP Smtp POP3 SnmpSnmp Trap Http TCP Pptp

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.
Top Page Image Contents