Edimax Technology Broadband Router Static Routing, Firewall, Network address of destination LAN

Page 37

2.6.6 Static Routing

This router provides Static Routing function when NAT is disabled. With Static Routing, the router can forward packets according to your routing rules. The IP sharing function will not work any more in Static Routing mode.

Note: The DMZ function of firewall will not work if static routing is enabled.

 

Parameters

 

Description

 

Enable Static Routing

 

Static Routing function is default disabled. You have to enable the Static Routing function

 

 

 

before your routing rules take effect.

 

Destination LAN IP

 

The network address of destination LAN.

 

 

 

 

 

Subnet Mask

 

The subnet mask of destination LAN.

 

 

 

 

 

Default Gateway

 

The next stop gateway of the path toward the destination LAN. This is the IP of the neighbor

 

 

router that this router should communicate with on the path to the destination LAN.

 

 

 

 

 

 

 

 

Hop Count

 

The number of hops (routers) to pass through to reach the destination LAN.

 

 

 

 

 

Interface

 

The interface that go to the next hop (router).

 

 

 

 

 

 

 

Fill in the "Destination LAN IP", "Subnet Mask”, “Default Gateway”, "Hop Count" and

 

Add a Rule

 

"Interface" of the rule to be added and then click "Add". Then this rule of Static Routing will be

 

 

added into the "Static Routing Table" below. If you find any typo before adding it and want to

 

 

 

 

 

 

retype again, just click "Reset" and the fields will be cleared.

 

 

 

 

 

 

 

If you want to remove some routing rules from the "Static Routing Table", select the rules you

 

Remove a Rule

 

want to remove in the table and then click "Delete Selected". If you want remove all rules

 

 

 

from the table, just click "Delete All" button. Click "Reset" will clear your current selections.

 

 

 

 

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.7 Firewall

The Broadband router provides extensive firewall protection by restricting connection parameters, thus limiting the risk of hacker attack, and defending against a wide array of common Internet attacks. However, for applications that require unrestricted access to the Internet, you can configure a specific client/server as a Demilitarized Zone (DMZ).

Note: To enable the Firewall settings select Enable and click Apply

36

Image 37
Contents User’s Manual Page Page Package Content FeaturesIntroduction Minimum RequirementsUSB Front PanelLight Status Description Configure your PC to obtain an IP address automatically Setup Diagram∙ DNS Configuration Select Disable DNS Getting started2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTGeneral Setup Chapter Quick Setup Wizard ChapterStatus Info Chapter Time Zone Quick SetupBroadband Type Based on your selectionMenu Description Cable ModemYour ISP will automatically give you an IP address This Protocol only used for Australia’s ISP connectionFixed-IP xDSL MTU PPPoEPptp Connecting to the Pptp serverConnection ID This is the ID given by ISP. This is optionalL2TP Connecting to the L2TP serverInternet exceeds the Idle Time Will not auto-connect to the ISPTelstra Big Pond IP of the Login ServerIdle Time Out Server manuallyGeneral Settings System Router default the Time Server Address isOn your selection BelowRemote Management Password SettingsPptp WANL2TP Static IP Address Dynamic IPPPPoE PPP over Ethernet 5 L2TPLAN DdnsLAN IP WirelessSetting Basic SettingsEssid Iapp Advanced SettingsWMM WEP only Security3.2 802.1x only Password used by external Radius server3.3 802.1x WEP Static key WPA Radius WPA Pre-shared keyWpatkip WPA2AESQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT Port Forwarding ALG SettingSupport these types of applications Description of this setting Between the Virtual Server and the DMZ settingsVirtual Server Range of ports to be forward to the private IPExample Virtual Server Special ApplicationsExample Example Special ApplicationsUDP TCPALG Settings UPnP SettingsUPnP Feature Disable Firewall Static RoutingBefore your routing rules take effect Network address of destination LANDoS Certain Internet applicationsActivities To a particular IP address in your LANInternet services that use these ports Just click ResetClick Apply Changes to save the setting Click Reset to clear all fieldsExample Access Control DoS Denial of ServiceEnable/disable URL Blocking Clear the selection and re-select again, just click ResetISP 4 DMZNAS System Print ServerIPP Set the host name that shows in network neighborhood GeneralSet which network neighborhood group that you want to join NeighborhoodShare Input the share name Add/Edit ShareFill the share comments for this share item here Advanced Read and Write, Read Only, or Don’t share by defaultNAS Tools Client automaticallyEXT2 NAS StatusAll to remove all partitions This Page shows the status of attached USB storage devicesSize Total available space of this partition Partition names of the USB storage deviceTotal space This shows free space of the specified partitionStatus and Information StatusVersion Whether the Dhcp Server function is enabled/disabledAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsReset Firmware UpgradeMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Snmp TCP FTP Smtp POP3Snmp Trap Http TCP Pptp

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.