Edimax Technology Broadband Router manual Table, just click Delete All button, MAC Filtering

Page 39

Add PC

You can click Add PC to add an access control rule for users by IP addresses.

 

 

 

If you want to remove some PC from the "IP Filtering Table", select the PC you want to

Remove PC

remove in the table and then click "Delete Selected". If you want remove all PCs from the

 

table, just click "Delete All" button.

 

 

Filter client PC by MAC

Check “Enable MAC Filtering” to enable

 

 

address

MAC Filtering.

 

 

 

Fill in “Client PC MAC Address” and “Comment” of the PC that is allowed to access the

Add PC

Internet, and then click “Add”. If you find any typo before adding it and want to retype

 

again, just click "Reset" and the fields will be cleared.

 

 

 

If you want to remove some PC from the "MAC Filtering Table", select the PC you want to

Remove PC

remove in the table and then click "Delete Selected". If you want remove all PCs from the

table, just click "Delete All" button. If you want to clear the selection and re-select again,

 

 

just click “Reset”.

 

 

You can now configure other advance sections or start using the router (with the advance settings in place)

 

Parameters

 

Description

 

Client PC Description

 

The description for this client PC rule.

 

 

 

 

 

 

 

Enter the IP address range that you wish to apply this Access Control rule. This is the

 

Client PC IP Addresses

 

user’s IP address (es) that you wish to setup an Access Control rule.

 

 

 

Note: You need to give your LAN PC clients a fixed/static IP address for the Access

 

 

 

Control rule to work properly.

 

 

 

 

 

Client PC Service

 

You can block the clients from accessing some Internet services by checking the services

 

 

you want to block.

 

 

 

 

 

 

 

 

Protocol

 

This allows you to select UDP, TCP or both protocol types you want to block.

 

 

 

 

 

Port Range

 

It can be assign up to five port ranges. The router will block clients from accessing

 

 

Internet services that use these ports.

 

 

 

 

Apply Changes

 

Click “Apply Changes” to save the setting.

 

 

 

 

 

Reset

 

Click “Reset” to clear all fields.

 

 

 

 

Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

38

Page 38 Page 40
Image 39
Page 38 Page 40
Contents User’s Manual Page Page Minimum Requirements FeaturesPackage Content IntroductionFront Panel USBLight Status Description Getting started Setup DiagramConfigure your PC to obtain an IP address automatically ∙ DNS Configuration Select Disable DNS2c Windows 2b Windows XP∙ IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTQuick Setup Wizard Chapter General Setup ChapterStatus Info Chapter Based on your selection Quick SetupTime Zone Broadband TypeThis Protocol only used for Australia’s ISP connection Cable ModemMenu Description Your ISP will automatically give you an IP addressFixed-IP xDSL MTU PPPoEThis is the ID given by ISP. This is optional Connecting to the Pptp serverPptp Connection IDWill not auto-connect to the ISP Connecting to the L2TP serverL2TP Internet exceeds the Idle TimeServer manually IP of the Login ServerTelstra Big Pond Idle Time OutGeneral Settings Below Router default the Time Server Address isSystem On your selectionRemote Management Password SettingsWAN PptpL2TP 5 L2TP Dynamic IPStatic IP Address PPPoE PPP over EthernetLAN DdnsLAN IP WirelessBasic Settings SettingEssid Advanced Settings IappWMM WEP only SecurityPassword used by external Radius server 3.2 802.1x only3.3 802.1x WEP Static key WPA2AES WPA Pre-shared keyWPA Radius WpatkipQoS Access ControlEdit QoS Rule Uncheck Enable QoS to disable QoS function for the WAN portNAT ALG Setting Port ForwardingSupport these types of applications Range of ports to be forward to the private IP Between the Virtual Server and the DMZ settingsDescription of this setting Virtual ServerExample Virtual Server Special ApplicationsTCP Example Special ApplicationsExample UDPUPnP Settings ALG SettingsUPnP Feature Disable Network address of destination LAN Static RoutingFirewall Before your routing rules take effectTo a particular IP address in your LAN Certain Internet applicationsDoS ActivitiesClick Reset to clear all fields Just click ResetInternet services that use these ports Click Apply Changes to save the settingClear the selection and re-select again, just click Reset DoS Denial of ServiceExample Access Control Enable/disable URL BlockingISP 4 DMZPrint Server NAS SystemIPP Neighborhood GeneralSet the host name that shows in network neighborhood Set which network neighborhood group that you want to joinShare Add/Edit Share Input the share nameFill the share comments for this share item here Client automatically Read and Write, Read Only, or Don’t share by defaultAdvanced NAS ToolsThis Page shows the status of attached USB storage devices NAS StatusEXT2 All to remove all partitionsThis shows free space of the specified partition Partition names of the USB storage deviceSize Total available space of this partition Total spaceStatus and Information StatusWhether the Dhcp Server function is enabled/disabled VersionAs well as the Primary DNS and Secondary DNS being used System Log Statistics Tool Configuration ToolsFirmware Upgrade ResetMay start using the router again Appendix a How to Manually find your PC’s IP and MAC addressGlossary Http TCP Pptp TCP FTP Smtp POP3Snmp Snmp Trap

Broadband Router specifications

Edimax Technology is a well-respected name in the networking equipment industry, and their broadband routers are known for providing reliable and high-performance connectivity for both home and office environments. One of their prominent offerings is the Edimax broadband router, which features advanced technology designed to meet the demands of modern internet usage.

One of the key features of Edimax routers is their support for the latest Wi-Fi standards, including IEEE 802.11ac. This technology allows for faster data transfer speeds, improved range, and higher capacity, making it ideal for streaming HD content, online gaming, and handling multiple devices simultaneously. With dual-band capability, Edimax routers can operate on both 2.4GHz and 5GHz frequencies, optimizing performance based on the type of activity. The 5GHz band is particularly useful for bandwidth-heavy operations, while the 2.4GHz band is great for devices that require longer range.

Security is a top priority for Edimax, and their broadband routers come equipped with robust security features like WPA/WPA2 encryption, ensuring that users' data remains secure from unauthorized access. Additionally, many Edimax models include a firewall, which offers an extra layer of protection against external threats.

User-friendliness is another hallmark of Edimax routers. The setup process is often quick and straightforward, with many models featuring WPS (Wi-Fi Protected Setup) for easy connection of devices. The routers may also include web management interfaces that allow users to easily configure settings, monitor network traffic, and manage connected devices.

Another noteworthy characteristic is the built-in Quality of Service (QoS) functionality. This feature prioritizes bandwidth for critical applications and devices, ensuring that activities like video conferencing and online gaming experience minimal lag and buffering.

Moreover, the design of Edimax broadband routers often reflects both aesthetic considerations and functionality, typically featuring compact forms and heat-dissipating materials to enhance durability and performance.

Finally, Edimax Technology backs its products with reliable customer support and often regular firmware updates, ensuring that users can enjoy the latest enhancements and security patches. Overall, Edimax broadband routers represent a solid blend of performance, security, and user-centric features tailored for today's internet needs.
Top Page Image Contents