Edimax Technology Edimax user guide Router manual Session Limit

Page 52

Session Limit

This new feature allows to drop the new sessions from both WAN and LAN side. If the new sessions number are exceed the maximum sessions in a sampling time.

Figure 5-3: Session Limit

Session Limit

 

The period to count the new session. Only those new sessions

Sampling Time

occurred in the most recently sampling time were be count for limit

checking.(Default is 400 mil-sec)

 

 

 

Maximum of Total New

If the number of new sessions for system exceed the maximum in the

session

Sampling Time. Any new sessions in the system will be dropped.

 

(Default: 65535 session/sec)

Maximum of New

If the number of new sessions for the host exceeds the maximum in the

Sessions for Host

sampling time. Any new session of the host will be dropped. (Default:

 

session/sec)

Maximum of Dropped

If the number of dropped new sessions for the host exceeds the

New Sessions for Host

Maximum in the sampling time, any new session of the host will be

 

dropped for the pause time.

Pause Time

Within the pause time, no new session of the suspended host could be

 

served by system.( Default is 5 minutes)

 

 

Page 48

Image 52
Contents Load Balancing Router User’s Guide Page Table of Contents Overview General Problems Internet Access Overview TCP/IP SettingsOperation System Status WAN Status NAT Status Internet Features IntroductionMultiple IP Address Support Other Features Port Switching HubPackage Contents Physical DetailsLED Action Condition Default Settings Reset ButtonRear Panel LAN PortsWindows Tftp utility Basic Setup ProcedureConfiguring The Load Balancer for your LAN OverviewNo Response ? Settings LAN & Dhcp ConfigurationIP Address Subnet MaskLAN Any IP Setup Dhcp IP AddressRange ARP ProxyInstalling The Load Balancer in your LAN Installation DiagramConfiguring The Load Balancer for Internet Access Primary Setup ScreenSettings Primary Setup Optional Configure PCs on your LAN TCP/IP SettingsInternet Access OverviewMacintosh Clients Accessing AOLLinux Clients To act as a Dhcp Client recommended Advanced Port Setup Port OptionsSettings Port Options Connection OptionsTransparent Bridge OptionLoad Balance Load BalanceSettings Load Balance Load BalanceStatistics InterfaceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Configuration Host IP SetupSettings Host IP Setup Host IP SetupHost Network BindingHost & Group ListConnecting to the Virtual Servers Virtual ServersSettings Virtual Server EnableServer Type AddressSettings Custom Virtual Servers Custom Virtual ServersSelect Custom Server Server List Name Custom ServerCustom Virtual Server Settings Special Applications Special Application ConfigurationSpecial Applications Select Special Application Name Select Name ItemUsing a Special Application on your PC Outgoing Port RangeIncoming Protocol Incoming Port RangeTo use the Dynamic DNS feature Dynamic DNSSettings Dynamic DNS Multi DMZ Multi DMZSettings Multi DMZ UPnP Settings UPnPUPnP Option NAT Settings NAT NAT AliasAdvanced Features 10 Advanced FeaturesSettings Advanced Features Interface Smtp Simple Mail Transport Protocol Binding Using Remote Web-based SetupProtocol Protocol and Port Binding Security Management URL FilterSettings URL Filter Block InternetAccess Filter Settings Access FilterSetup Access Group Filter SettingBlock Well-known PortsUser-defined Ports to BlockSession Limit Firewall Exception Enable System Filter ExceptionProtocol Foreign Port RangeQoS Configuration QoS SetupData QoS Setup FeatureData Policy Configuration Policy ConfigurationNetwork Admission Policy Management Assistant SnmpSettings Snmp Email AlertSettings Email Alert Enable/Disable Email Alert Email Alert Configuration EventSyslog 3SyslogSyslog Global Syslog ConfigurationSyslog Server Admin Password Screen Admin Password ScreenUpgrade Firmware Firmware Upgrade ScreenExisting Dhcp Server Advanced LAN ConfigurationRouting Settings Routing Static Routing Example Configuring Other Routers on your LANFor The Load Balancer Gateways Routing Table For Router Bs Default Route For Router As Default RouteEntry 2 Segment Operation Operation and StatusSystem Status Data System Status DeviceRestore Factory Defaults Restore Factory DefaultsWAN Status WAN StatusNAT Timeouts NAT StatusData NAT Status LAN IP InfoErrors TCP ProsperityNAT Traffic NAT ConnectionsFCC Statement SpecificationsCE Marking Warning Overview TCP/IP Settings Windows TCP/IP SetupChecking TCP/IP Settings Windows 9x/ME Using Dhcp Checking TCP/IP Settings Windows Select Control Panel Network and Dial-up ConnectionUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings Windows XP Figure B-7 Network Configuration Windows XPFigure B-8 TCP/IP Properties Windows XP General Problems TroubleshootingInternet Access Solution