Figure 8-1: Routing
Note:
If there is an entry or entries in the Routing table with an Index of zero (0), these are System entries. You cannot modify or delete these entries.
Settings – Routing
Dynamic | • RIP v2 – This acts as “master” switch. If enabled, the selected WAN or LAN |
Routing | will run RIPv1/v2, otherwise they don’t have RIP function. |
| • LAN, WAN1, WAN2 – If enabled, any WAN or LAN can execute RIP function. |
|
|
Entry Index | • |
| • If adding a new entry, ignore this field. |
| • To edit an existing entry, select it from the list, and click the "Select" button. |
| The screen will then update with the data for the selected entry. |
| • If the Index is 0, this is a System entry that you can neither delete nor modify. |
|
|
Network | The network address of the remote LAN segment. For standard class "C" LANs, |
Address | the network address is the first 3 fields of the Destination IP Address. The 4th |
| (last) field can be left at 0. |
Netmask | The Network Mask for the remote LAN segment. For class "C" networks, the |
| default mask is 255.255.255.0 |
Page 60