28LongView® IP KVM Extenders Installer/User Guide
5.Press 1 to select the Transmitter Network Config option and press Enter.
Figure 3.6: Transmitter Network Configuration Menu
6.Press 1 to select the Transmitter IP Address option and press Enter.
7.Type a valid IP address and press Enter.
8.Press 2 to select the Transmitter Netmask option and press Enter.
9.Type a valid Transmitter Netmask. Press Enter to return to the Transmitter Network Configuration Menu.
10.Press 3 to select the Transmitter Default Gateway option and press Enter.
11.Type a valid Transmitter Default Gateway and press Enter.
12.Type 0 (zero) and press Enter to exit and apply changes, or to return to the Network Configuration Menu. If you made a mistake and do not wish to save the changes you made to the network settings, type C and press Enter. You will be automatically returned to the Main Menu.
To configure network settings for the user station:
1.Press option 1 to access the Receiver Menu and press Enter. If the password option is enabled, you will be prompted for a password.