Avocent 590-836-501D manual Introduction, LongView IP KVM extender system features, Security

Page 7

1

CHAPTER

1

Product Overview

Introduction

The Avocent LongView® IP KVM extender system, which includes a transmitter and a user station, provides users with a full workstation desktop experience from anywhere on the corporate TCP/IP network, while maintaining the target computers securely housed in a corporate data center. Desktop users can access keyboard, mouse, video, audio, USB mass storage devices and other USB devices from target computers via the LongView IP KVM extender system.Virtual USB support is also featured in the LongView IP KVM extender system.

NOTE: References to the LongView IP KVM extender system in this document refer to both the LongView IP KVM user station (LongView IP, LongView IP DH [Dual-Head], LongView IP HR and LongView IP VG user stations) and the LongView IP KVM transmitter. The LVIP-T transmitter accompanies the LVIP-R user station, the LVIPVG-T transmitter accompanies the LVIPVG-R user station, the LVIPHR-T transmitter accompanies the LVIPHR-R user station and the LVIPDH-T transmitter accompanies the LVIPDH-R user station. See Transmitter features on page 3 for more information.

LongView IP KVM extender system features

The LongView IP KVM extender system contains the following features.

NOTE: This product contains certain free and/or open source components. To request an open source software kit for the open source components used in this product, please complete a FOSS Request Form at http://www.avocent.com/x_For_The_User/Policies/Open_Source_Policy.aspx.

Security

The LongView IP KVM extender system supports Secure Sockets Layer (SSL) over a TCP/IP connection. All media streams transmitted between the user station and the transmitter are encrypted. Password protection is also provided to control access to all administration functions.

Flash upgradable

Upgrade your firmware at any time using the XMODEM or HTTP protocols to ensure that your LongView IP KVM extender system is always running the most current version available. Both the transmitter and the user station are Flash upgradable.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Longview IP KVM Extenders USA Notification Canadian Notification Safety and EMC Approvals and MarkingsJapanese Approvals Sound Level Measure LongView IP KVM Extenders Power On Table of Contents Using Share Mode Using a USB device with Share Mode Flash upgradable LongView IP KVM extender system featuresIntroduction SecuritySupport for keyboards, mice and mass storage devices Ethernet addressingVideo Transmitter featuresInteroperability User station features User station modes LongView IP KVM Extender System 1 Descriptions Number Safety PrecautionsProduct Overview LongView IP KVM Extenders Installer/User Guide Optional items Getting StartedMounting Option Installation OptionsTo connect the transmitter Point-to-point installationLongView IP KVM Extenders Installer/User Guide External Power Supply Description of Figure Number User Station Description of Figure NumberExternal Power DVI Ports Installation To connect the user station Connecting powerNetworked installation To connect power to the user station or transmitterTo install the LongView IP KVM extender system on a network LongView IP KVM Extenders Installer/User Guide Rear panel OverviewLED identification Front panelTo display system information Accessing the SystemDisplaying system information using the OSD OSD functionsUser Station Connected to Transmitter Configuring networking parameters using the OSDNetwork Config Menu Receiver Setting the OSD timeoutTo change the OSD Timeout Accessing the serial menuSerial Menu Navigating the serial menu Configuring Network SettingsItems needed to access the serial menu To access the serial menuTransmitter Main Menu To configure network settings for the transmitterTransmitter Network Configuration Menu To configure network settings for the user stationReceiver Main Menu To access the Network Configuration Menu10 Network Configuration Menu 11 Receiver Network Configuration Menu To configure the network settings for the user stationTo detect the IP address of a connected transmitter Detecting a transmitter IP addressAuthentication for the LongView IP KVM user station AuthenticationTo access the Receiver Security Configuration Menu To access the Transmitter Security Configuration Menu To change the user station passwordTo reset your user station password Authentication for the transmitterFlash Upgrading your LongView IP KVM Extender System 14 Transmitter Security Configuration MenuTo Flash upgrade your transmitter using Http To Flash upgrade your transmitter using XmodemHttp//192.168.13.38080/TX.dld Restoring Factory Default Settings To view LongView IP KVM user station system information Resetting the LongView IP KVM Extender SystemTo reset the LongView IP KVM user station or transmitter Viewing System Information18 Appliance Information Menu To view transmitter system informationTo configure video input settings Configuring Video Input SettingsTo configure preferred monitor resolutions Preferred monitor resolutions Edid preferred timing22 Advanced Video Settings Menu Session retry settingsTo change the hotkey sequence that activates your OSD Configuring the OSD Hotkey SequenceTo access the Session Retry Menu To change the retry settingsOSD Inactivity Time-out 25 Receiver Console Settings MenuTo change the OSD time-out period Audio Performance Settings28 Transmitter Audio Performance Menu To change the audio performance setting for the transmitterTo set up the display power saving mode feature Display power saving mode30 Display Power Saving Mode Menu LongView IP KVM Extenders Installer/User Guide Audio and video quality Using Share ModeUsing a USB device with Share Mode Keyboard and mouse control during Share ModeUsing Share Mode To enable Share Mode on the user station To enable Share Mode on the transmitterLongView IP KVM Extenders Installer/User Guide Simple Ascii Manager Interface Advanced OperationsSami Parameters and Descriptions Type Example To access the Sami MenuSimple Ascii Management Menu Example sessionLongView IP KVM Extenders Installer/User Guide Encryption Appendix a Technical SpecificationsExtension Ports User PortsEnvironmental DimensionsSupported Hardware Audio Performance Video PerformanceConsole Ports Appendices IP Port Usage Table A.3 LVIP-R User Station Product Specifications NetworkTable A.3 LVIP-R User Station Product Specifications EMC Approvals SafetyMarkings Table A.4 LVIP-T Transmitter Product Specifications Network Safety EMC Approvals LVIP-T, LVIPHR-T and LVIPDH-T Transmitters Appendix B Factory Default SettingsPassword Print ScreenLongView IP KVM Extenders Installer/User Guide Appendix C Technical Support To resolve an issueNo power status light on user station Appendix D TroubleshootingNo audio from speakers attached to user station Slow file transfer rate from or to the USB mass media device Transmitter disconnected from Dhcp server LongView IP KVM Extenders Installer/User Guide GNU General Public License License InformationLongView IP KVM Extenders Installer/User Guide License Information LongView IP KVM Extenders Installer/User Guide Page For Technical Support

590-836-501D specifications

The Avocent 590-836-501D is an advanced KVM (Keyboard, Video, Mouse) switch designed for efficient data center management and streamlined IT operations. This device is specifically engineered to facilitate the connection of multiple servers to a single workstation, thus allowing administrators to manage several systems seamlessly.

One of the main features of the Avocent 590-836-501D is its robust scalability. The KVM switch supports a wide variety of devices, making it suitable for installations in both small and large environments. With this solution, users can connect numerous servers, which enhances operational efficiency and reduces the physical space needed for multiple workstations.

The device is equipped with advanced video capabilities, supporting high-resolution video output. This means that users can work with crisp and clear visuals, an essential aspect when dealing with complex server environments where detail is key. The Avocent KVM switch also supports various video formats, ensuring compatibility with a diverse range of server graphics cards and display technologies.

Another notable technology integrated into the Avocent 590-836-501D is its remote access feature. This allows IT professionals to connect to their systems from virtually anywhere, empowering them to perform maintenance, monitor performance, or troubleshoot issues without needing to be on-site. This remote capability is particularly valuable for organizations looking to enhance uptime and reduce the need for manual intervention.

In terms of security, the Avocent 590-836-501D includes advanced authentication features. This helps to ensure that only authorized personnel can access the systems connected to the KVM switch, serving as a vital safeguard for sensitive data and critical infrastructure.

The KVM switch also provides easy management through its user-friendly interface. Administrators can quickly switch between connected devices, and the intuitive design ensures that even those who are not technologically inclined can navigate its features with ease.

Finally, the Avocent 590-836-501D is built with durability and longevity in mind. Its robust construction is designed to withstand the rigors of daily use in high-demand environments, minimizing downtime and maintenance costs over the product’s lifecycle.

In summary, the Avocent 590-836-501D stands out as a versatile and reliable KVM switch with features like scalability, remote access, high-resolution video support, and security measures that make it an essential tool for modern data center operations.
Top Page Image Contents