Chapter 3: Operations | 47 |
|
|
NOTE: To ensure that audio operates correctly, configure the user station and the transmitter with identical audio performance settings.
To change the audio performance setting for the transmitter:
1.From the serial menu, press 2 to access the Transmitter Main Menu and press Enter. If the password option is enabled, you will be prompted for a password.
2.Press 7 to access the Console Settings Menu and press Enter. The current audio performance setting is displayed beside menu item 3.
3.Press 3 to access the Audio Performance Menu and press Enter. The Audio Performance Menu shows you the audio settings that you can choose from. The current setting is indicated by an asterisk symbol (*).
Figure 3.28: Transmitter Audio Performance Menu
4.Type the number that corresponds to the audio setting you wish to apply and press Enter.
5.To confirm your selection and exit the screen, type 0 (zero) and press Enter. The unit resets after you press Enter.
To change the audio performance setting for the LongView IP KVM user station:
1.From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled, you will be prompted for a password.
2.Press 8 to access the Console Settings Menu and press Enter. The current audio performance setting is displayed beside menu item 4.