Buffalo Technology WLM2-G54 Environmental Resistance, Upgradeable Firmware, Diagnostic Support

Page 13

7.2Environmental Resistance

The WLM2-G54 AP’s high durability design allows resistance to environmental conditions like temperature changes. Since it is less susceptible to environmental change, it is suitable for warehouses, public areas and other locations where temperature control is not available. Optional dust-proof and waterproof casings are available.

7.3Upgradeable Firmware

With Buffalo’s firmware upgrade utility tool, updating the firmware will be simple.

7.4Diagnostic Support

The WLM2-G54 provides tools to monitor and methods to correct its wireless operations. Some of these tools are device status, packet status, wireless PC information, ping test, log information and re-initialization of parameters.

PART II

8.0Client Configuration

8.1Introduction II

This chapter provides general information about:

•Basic Setup

•Time Setup

•Administrative Managing

•Bridging Setup

•Routing Setup

•Packet filtering Setup

•Limiting wireless client number

•WDS (AP-to-AP) Setup

•Wireless Setup

Explanations for each parameter and details of how to use the parameter are described in the next chapter. Connecting and setting up the access point for accessing the Internet quickly are the objective of this chapter.

8.2Setup Preparation

The following parameters must be known before setting up the WLM2-G54 Intelligent Access Point. If you do not have these, you should consult with your IT personnel.

•WLM2-G54’s ESS-ID

•WLM2-G54’s system name or location name

•WLM2-G54’s IP address. If you plan to use DHCP, this is not necessary.

•WLM2-G54’s wired side MAC address. Check the label on the back of the WLM2- G54.

8.3Setup Overview

A general setup process is shown below. Special setups for security, filtering and others will be explained in later sections.

1.Connect the cables to WLM2-G54 based on the wiring instructions. It is possible to use a straight cable to connect the AirStation directly to your PC. In this case you need some type of Terminal Software to set up the WLM2-G54.

2.The PC must have a valid TCP/IP setting. For the TCP/IP setup or to check it, please refer to the instructions for your OS (the default IP and subnet address of the WLM2-G54 is 1.1.1.1 and 255.255.0).

8.4Installation of the Client Man-

ager

1.Insert the Air Navigator CD into the CD- ROM drive.

2.Start the Install wizard. If the wizard does not start, double click the Setup.exe file in the Air Navigator CD. Install the Client Manager.

3.Click Start and select Programs / AirStation Utility / Client Manager to open the Client Manager. The setup PC must have a valid IP address of its own.

4.Select Edit / Search AirStation to look for the nearest AirStation. Highlight the WLM2-G54.

8

Page 12 Page 14
Image 13
Page 12 Page 14
Contents WLM2-G54 Page Part 10.1 Iii SignsPackage Contents Summary of FeaturesIntroduction System RequirementsSecurity Features FeaturesAuthentication PrivacyIntegrity Features Access AuthorizationImproved Fault Tolerance Ibss SecurityNetwork Administration Fea Tures Network Load Distribution FeaturesNetwork Solutions Easy Support FeaturesTypical Office Situations Apartments or CondominiumsHospitals SchoolsFactories Area Intranets PoE Power over EthernetSupport Functions Diagnostic Support Upgradeable FirmwareClient Configuration Introduction Setup PreparationSetup Screen After finding an AirStation, select Admin / Set IP addressInput Parameters Through the Client Manager Input Parameters Through a Wired PC,Terminal SoftwareSelect Start / Run Input Parameters Through a Wired PC,Telnet SoftwareBasic Settings Detailed Configurations IntroductionManagement Time SettingsBridge System1=General administrative informationRouting Basic Filter See next Manual SettingBasic Filter Information Server Name=The name of the Radius server or the IP addressAuthorized Wireless LAN PCs List of the Wireless PCsWireless Add Peer AirStation MAC Address11 Link Integrity Settings 10 WirelessLink Integrity Settings Configure EAP in the Security/802.11g screen Privacy, WEPDigits of hexadecimal numbers, i.e. a3d58b62fe PS Privacy SeparatorDiagnostics Introduction Wireless Distribution System SettingsParameters for the Diagnostic Operation Add AirStation Connected AirStation3 Wireless LAN PC Information See previous Wireless LAN PC Information5 Ping Test Appendix a Additional InformationAppendix a Intelligent Access Point WLM2-G54 Specifications Other Problems Appendix B TroubleshootingLED Activity Table B.1 Diag LED Activity TableDCE Data Communications Equip CRC Cyclic Redundancy CheckDsss Direct Sequence Spread DTE Data Terminal Equipment DeviceRAM Random Access Memory Non Radius Remote Authentication DialMips Millions of Instructions Per PCI Peripheral Component InterconROM Read Only Memory Permanent Wlan Wireless LAN a LAN topologySmtp Simple Mail Transfer Protocol Snmp Simple Network ManagementPage Page Buffalo Technology Technical Support

WLM2-G54 specifications

Buffalo Technology is known for its high-quality networking products, and one of their standout offerings is the WLM2-G54 wireless LAN router. This device caters to both home and small office users, prioritizing reliability and performance in wireless networking.

The Buffalo WLM2-G54 operates on the IEEE 802.11g standard, providing impressive wireless speeds of up to 54 Mbps. This makes it ideal for activities such as web browsing, streaming videos, and online gaming. Its backward compatibility with older 802.11b devices ensures that users can seamlessly connect their legacy equipment without needing extensive upgrades.

One of the most notable characteristics of the WLM2-G54 is its robust security features. It supports various encryption methods, including WEP, WPA, and WPA2, allowing users to establish secure connections and protect their sensitive data from unauthorized access. The inclusion of a built-in firewall adds another layer of defense, safeguarding the network from external threats.

In terms of physical design, the WLM2-G54 is compact and user-friendly. It can easily fit into small spaces, making it a convenient addition to any home or office setup. The router includes multiple LAN ports for wired connections, ensuring that users can connect additional devices such as desktops, gaming consoles, and printers with ease.

The WLM2-G54 also incorporates advanced technologies to enhance performance. One such feature is Buffalo's "Client Mode," which allows the router to connect to existing networks and extend coverage. This flexibility is beneficial for users who need to bridge long distances or eliminate dead zones in larger spaces.

Another significant characteristic of the WLM2-G54 is its easy setup process. The device typically features a user-friendly web interface, enabling users to configure their network settings without requiring extensive technical knowledge. Additionally, Buffalo often provides firmware updates to improve performance and security, ensuring that users always have access to the latest enhancements.

Overall, Buffalo Technology’s WLM2-G54 wireless LAN router is a versatile, reliable choice for those looking to establish or expand their wireless networking capabilities. With its combination of speed, security, and user-friendly features, it stands out as an excellent option for both home and small office environments. Its ability to integrate with existing network infrastructures further solidifies its place as a valuable asset in modern networking solutions.
Top Page Image Contents