Buffalo Technology WLM2-G54 manual Input Parameters Through a Wired PC,Telnet Software

Page 16

possible to use any other off-the-shelf software.

■ Note: If the AirStation is already connected by Telnet or Client Manager, you cannot log in from the terminal software.

3.Setup the terminal as follows: Baud rate: 57600

Data bit: 8

Parity: None

Stop bit: 1

Flow Control: None

4.When the "Apxxxxxxxxxxxxx login" prompt appears, login the WLM2-G54 by "root".

5.Set the WLM2-G54’s time by using “date” command: Setup date year/month/date (use two digit number for the month and the date, Example: "set date 2002/03/27")

6.Set the WLM2-G54’s ESS-ID by using "essid" command.

airset 11g essid xxxxxx

(ESS-ID is defined by up to 32 alphanu- meric characters.The default value is 12 digits. You can reset the ESS-ID to the default value by using "airset 11g essid_default" command.)

7.Set the WLM2-G54’s wireless channel. Use

“airset 11g channel xx”

command. Select one number from 1~11. The default number is 11.

8.Set the WLM2-G54’s WEP. Use “airset 11g wep xxxx yyyy zzzz” command. Xxxx is the key type (40 or 128bit) and yyyy is the key index number and zzzz is the actual key as shown below. Keytype: Key – 40bit WEP

Key128 – 128bit WEP

Key index:The index number of the WEP to be used, select one from 1~4. The default is 1.

Key: “text” + 5 blank spaces + 5 letters or 10 digits hexadecimal (for 40bit WEP) or 13 characters or 26 digits hexadecimal (for 128bit WEP)

■Note: the text must be used with “ ” mark.s. Examples:

airset 11g wep key text “skey5”

airset 11g wep key a3d58bb632

airset 11g wep key index 1 text “skey5”

If you want to clear the WEP key use: airset 11g wep keytype clear (the keytype is explained above).

9.Set the WLM2-G54’s system ID name. Use the “set apname xxx” command. Xxx is a numeral of up to 32 characters. An example is: Set apname AirStation01. If you need to re-set the device to default name use the following example. Set apname _default.

10.Set the WLM2-G54’s IP address. Use “ip address lan0 assigned_ip” command. Assigned_ip:The IP address assigned by your ISP. Examples:

Ip address lan0 192.168.100.60/ 255.255.255.0 – manually input the IP address and Netmask.

Ip address lan0 dhcp – use the

DHCP server

Ip address lan0 clear – clears the IP address

11.Set the WLM2-G54’s default gateway. Use “ip defaultgw gw_ip” command. Gw_ip is the assigned gateway IP. Example: gw_ip 192.168.0.10

8.8Input Parameters Through a Wired PC,Telnet Software

The WLM2-G54 setup can be performed by using Telnet software similar to the Terminal software above.

In order to bring up the setup page:

1.Connect the supplied serial cable to the AirStation and the PC’s COM port.

2.Select Start / Run.

3.Input “Telnet <WLM2-G54’s IP address>” in the file name and press “Enter”. The IP address can be identified through the Client

11

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WLM2-G54 Page Part 10.1 Signs IiiSummary of Features Package ContentsIntroduction System RequirementsFeatures Security FeaturesAuthentication PrivacyAccess Authorization Integrity FeaturesImproved Fault Tolerance Ibss SecurityNetwork Load Distribution Features Network Administration Fea TuresEasy Support Features Network SolutionsTypical Office Situations Apartments or CondominiumsHospitals SchoolsFactories Area Intranets PoE Power over EthernetSupport Functions Upgradeable Firmware Diagnostic SupportClient Configuration Introduction Setup PreparationAfter finding an AirStation, select Admin / Set IP address Setup ScreenInput Parameters Through a Wired PC,Terminal Software Input Parameters Through the Client ManagerInput Parameters Through a Wired PC,Telnet Software Select Start / RunDetailed Configurations Introduction Basic SettingsTime Settings ManagementSystem1=General administrative information BridgeRouting See next Manual Setting Basic FilterBasic Filter Information Server Name=The name of the Radius server or the IP addressList of the Wireless PCs Authorized Wireless LAN PCsWireless Add Peer AirStation MAC Address10 Wireless 11 Link Integrity SettingsConfigure EAP in the Security/802.11g screen Privacy, WEP Link Integrity SettingsDigits of hexadecimal numbers, i.e. a3d58b62fe PS Privacy SeparatorWireless Distribution System Settings Diagnostics IntroductionParameters for the Diagnostic Operation Add AirStation Connected AirStationSee previous Wireless LAN PC Information 3 Wireless LAN PC Information5 Ping Test Additional Information Appendix aAppendix a Intelligent Access Point WLM2-G54 Specifications Appendix B Troubleshooting Other ProblemsLED Activity Table B.1 Diag LED Activity TableCRC Cyclic Redundancy Check DCE Data Communications EquipDsss Direct Sequence Spread DTE Data Terminal Equipment DeviceRadius Remote Authentication Dial RAM Random Access Memory NonMips Millions of Instructions Per PCI Peripheral Component InterconWlan Wireless LAN a LAN topology ROM Read Only Memory PermanentSmtp Simple Mail Transfer Protocol Snmp Simple Network ManagementPage Page Buffalo Technology Technical Support

WLM2-G54 specifications

Buffalo Technology is known for its high-quality networking products, and one of their standout offerings is the WLM2-G54 wireless LAN router. This device caters to both home and small office users, prioritizing reliability and performance in wireless networking.

The Buffalo WLM2-G54 operates on the IEEE 802.11g standard, providing impressive wireless speeds of up to 54 Mbps. This makes it ideal for activities such as web browsing, streaming videos, and online gaming. Its backward compatibility with older 802.11b devices ensures that users can seamlessly connect their legacy equipment without needing extensive upgrades.

One of the most notable characteristics of the WLM2-G54 is its robust security features. It supports various encryption methods, including WEP, WPA, and WPA2, allowing users to establish secure connections and protect their sensitive data from unauthorized access. The inclusion of a built-in firewall adds another layer of defense, safeguarding the network from external threats.

In terms of physical design, the WLM2-G54 is compact and user-friendly. It can easily fit into small spaces, making it a convenient addition to any home or office setup. The router includes multiple LAN ports for wired connections, ensuring that users can connect additional devices such as desktops, gaming consoles, and printers with ease.

The WLM2-G54 also incorporates advanced technologies to enhance performance. One such feature is Buffalo's "Client Mode," which allows the router to connect to existing networks and extend coverage. This flexibility is beneficial for users who need to bridge long distances or eliminate dead zones in larger spaces.

Another significant characteristic of the WLM2-G54 is its easy setup process. The device typically features a user-friendly web interface, enabling users to configure their network settings without requiring extensive technical knowledge. Additionally, Buffalo often provides firmware updates to improve performance and security, ensuring that users always have access to the latest enhancements.

Overall, Buffalo Technology’s WLM2-G54 wireless LAN router is a versatile, reliable choice for those looking to establish or expand their wireless networking capabilities. With its combination of speed, security, and user-friendly features, it stands out as an excellent option for both home and small office environments. Its ability to integrate with existing network infrastructures further solidifies its place as a valuable asset in modern networking solutions.
Top Page Image Contents