Buffalo Technology WLM2-G54 manual Configure EAP in the Security/802.11g screen Privacy, WEP

Page 24

Configure EAP in the Security/802.11g screen.

■Note: For MAC Access Restriction, do not check the "Enable" box until you have set up Authorized MAC addresses (Section 9.8.4.3).

9.10.6 Privacy, WEP

Set the encryption method used in wireless communications for the protection of your data. It is necessary that the WEP key match between two parties for secure communica- tions. If multiple keys are used, the order must match between communicating devices. Examples of WEP key input are:

•5 digits of ASCII characters. They are case sensitive and “_” is allowed, i.e. Skey5.

•10 digits of hexadecimal numbers, i.e. a3d58b62fe.

•If WEP is not used, leave the box blank or input all 0s, which is equivalent to no-WEP.

9.10.7 PS - Privacy Separator

Enables automatic selection of the WLM2- G54 with the least load within the roaming area. If PS is used, communications between wireless clients will be automatically blocked. All clients are forced to go through the WLM2-G54 and the system’s combined security measures.

9.10.8 BSS (Basic Service Set) Basic Rate Set

The transmission data rate between devices. If one device supports 2Mbps only, the data rate for the entire network will be limited to 2Mbps. Otherwise, use 11Mbps max.

9.10.9 DTIM Period

WLM2-G54 transmits beacon signals to nearby clients in the preset interval. Once this option is used in the AP, the client must set the power management of the client card in order to control the beacon interval. Select a number from 1~255 sec. Selection of a larger number may save energy consumption, but it may delay wireless communication. The default value 1

Figure 9.12 Wireless Distribution System Settings

recommended.

9.10.10 ANY Connection

Allows a client PC to connect to the nearest WLM2-G54 by manually entering the word "any" for the ESS-ID in the Client Manager. If the "ANY Connection" is deselected in the WLM2-G54, the WLM2-G54 will not be found using the ESS-ID of "any" in the client PC.

9.11 Link Integrity Settings

Link Integrity is a rerouting feature activated when the wired connection is lost.

(see previous page)

9.11.1 Link Integrity

Enable or disable the Link Integrity feature.

9.11.2 Destination Host

Specify a host server name to which the WLM2-G54 sends packets to confirm connection.

19

Page 23 Page 25
Image 24
Page 23 Page 25
Contents WLM2-G54 Page Part 10.1 Signs IiiSummary of Features Package ContentsIntroduction System RequirementsFeatures Security FeaturesAuthentication PrivacyAccess Authorization Integrity FeaturesImproved Fault Tolerance Ibss SecurityNetwork Load Distribution Features Network Administration Fea TuresEasy Support Features Network SolutionsTypical Office Situations Apartments or CondominiumsSchools HospitalsFactories PoE Power over Ethernet Area IntranetsSupport Functions Upgradeable Firmware Diagnostic SupportClient Configuration Introduction Setup PreparationAfter finding an AirStation, select Admin / Set IP address Setup ScreenInput Parameters Through a Wired PC,Terminal Software Input Parameters Through the Client ManagerInput Parameters Through a Wired PC,Telnet Software Select Start / RunDetailed Configurations Introduction Basic SettingsTime Settings ManagementSystem1=General administrative information BridgeRouting See next Manual Setting Basic FilterBasic Filter Information Server Name=The name of the Radius server or the IP addressList of the Wireless PCs Authorized Wireless LAN PCsWireless Add Peer AirStation MAC Address10 Wireless 11 Link Integrity SettingsConfigure EAP in the Security/802.11g screen Privacy, WEP Link Integrity SettingsDigits of hexadecimal numbers, i.e. a3d58b62fe PS Privacy SeparatorWireless Distribution System Settings Diagnostics IntroductionParameters for the Diagnostic Operation Add AirStation Connected AirStationSee previous Wireless LAN PC Information 3 Wireless LAN PC Information5 Ping Test Additional Information Appendix aAppendix a Intelligent Access Point WLM2-G54 Specifications Appendix B Troubleshooting Other ProblemsLED Activity Table B.1 Diag LED Activity TableCRC Cyclic Redundancy Check DCE Data Communications EquipDsss Direct Sequence Spread DTE Data Terminal Equipment DeviceRadius Remote Authentication Dial RAM Random Access Memory NonMips Millions of Instructions Per PCI Peripheral Component InterconWlan Wireless LAN a LAN topology ROM Read Only Memory PermanentSmtp Simple Mail Transfer Protocol Snmp Simple Network ManagementPage Page Buffalo Technology Technical Support

WLM2-G54 specifications

Buffalo Technology is known for its high-quality networking products, and one of their standout offerings is the WLM2-G54 wireless LAN router. This device caters to both home and small office users, prioritizing reliability and performance in wireless networking.

The Buffalo WLM2-G54 operates on the IEEE 802.11g standard, providing impressive wireless speeds of up to 54 Mbps. This makes it ideal for activities such as web browsing, streaming videos, and online gaming. Its backward compatibility with older 802.11b devices ensures that users can seamlessly connect their legacy equipment without needing extensive upgrades.

One of the most notable characteristics of the WLM2-G54 is its robust security features. It supports various encryption methods, including WEP, WPA, and WPA2, allowing users to establish secure connections and protect their sensitive data from unauthorized access. The inclusion of a built-in firewall adds another layer of defense, safeguarding the network from external threats.

In terms of physical design, the WLM2-G54 is compact and user-friendly. It can easily fit into small spaces, making it a convenient addition to any home or office setup. The router includes multiple LAN ports for wired connections, ensuring that users can connect additional devices such as desktops, gaming consoles, and printers with ease.

The WLM2-G54 also incorporates advanced technologies to enhance performance. One such feature is Buffalo's "Client Mode," which allows the router to connect to existing networks and extend coverage. This flexibility is beneficial for users who need to bridge long distances or eliminate dead zones in larger spaces.

Another significant characteristic of the WLM2-G54 is its easy setup process. The device typically features a user-friendly web interface, enabling users to configure their network settings without requiring extensive technical knowledge. Additionally, Buffalo often provides firmware updates to improve performance and security, ensuring that users always have access to the latest enhancements.

Overall, Buffalo Technology’s WLM2-G54 wireless LAN router is a versatile, reliable choice for those looking to establish or expand their wireless networking capabilities. With its combination of speed, security, and user-friendly features, it stands out as an excellent option for both home and small office environments. Its ability to integrate with existing network infrastructures further solidifies its place as a valuable asset in modern networking solutions.
Top Page Image Contents