5.2.3 Spanning Tree (IEEE802.1d)
Network looping often results in repeated packet transmission, which causes overloads and interruption of communications.The Spanning Tree in a network loop disconnects one of the links, rerouting the traffic in the
event of failure, avoiding packet sending repetition and increasing network stability.
5.3Network Load Distribution Features
5.3.1 Load Balancing
This feature enables automatic selection of an available access point with the least load among multiple APs. It allows easy roaming, and the network stability can be increased significantly through even distribution of the traffic load.
5.3.2 Repeater
The
5.3.3 WDS – Wireless Distribution System
WDS is used to create
5.4Network Administration Fea-
tures
5.4.1SNMP – Simple Network Manage- ment Protocol
The
5.4.2 Syslog
This feature allows sending a copy of the system log to the Syslog server automatically. The log contains information on the operating status of each device, which enables
4