client will receive the same LAN IP address.
‧Remote Management
ZSR0104C SERIES can be configured and managed from the WAN side via a specific port.
‧MAC Clone
ZSR0104C SERIES allows users to specify the MAC address of the Network Interface Card if Internet Service Provider has the requirement.
‧Web-Based Setup
ZSR0104C SERIES can be managed through the Web browser in a LAN client PC connected to ZSR0104C SERIES or the Internet.
‧
ZSR0104C SERIES firmware can be updated easily via the Web Configuration Tool.
‧Reload
ZSR0104C SERIES can restore the factory default settings via the Web Configuration Tool.
1.4 Package Checklist
Please check the package contents of ZSR0104C SERIES to verify that you have received the items below. (Figure
1.One ZSR0104C SERIES Broadband Switch Router
2.One
3.One AC Power Adapter 7.5V / 0.7 A)
4.One Quick Installation Guide
If any of the items is incorrect, damaged, or missing, please immediately inform your dealer. Please retain the carton and the original packing material in case there is a need to return the product.
1.5 Installation Requirements
Before installing your ZSR0104C SERIES, be sure you have prepared the following requirements.
1.A Computer equipped with 10/100
2.TCP/IP protocol installed in the computer
3.Web Browser (Internet Explorer version 5.0 and higher / Netscape Navigator version 6.23 and higher)
4.One Cable Modem or xDSL Box
5.Broadband Internet Service
1.6 About this User’s Manual
This User’s Manual covers ZSR0104C SERIES hardware, installation, configuration, and troubleshooting etc. Each chapter provides detailed information and helps you acquire clear
Page 3