Appendix C: Terminology
‧Auth (TCP Authentication)
It implements the Identification Protocol, which can identify active TCP connections in Linux environment.
‧Boot
It is the process when the computer starts executing instructions.
‧Browser
It is an application program that helps users to view and interact with the information of the World Wide Web.
‧Cable Modem
It is a device that connects a computer to the Internet via the cable television network. It features asymmetric transmission rates: around 36 Mbps downstream from the Internet to the computer, and from 200 Kbps to 2 Mbps upstream from the computer to the Internet.
‧CuSeeMe
It is a
‧DHCP (Dynamic Host Configuration Protocol)
It is a protocol that automates the assignment and acquirement of IP addresses between a server and a client in a network.
‧DMZ
It allows LAN clients behind a NAT Router to be totally exposed and accessible to the WAN side in order to run special applications or set up a server.
‧DNS (Domain Name System)
Domain Name System explains where Internet domain names are located. In addition, it translates Internet domain names into Internet Protocol (IP) addresses. A domain name must be meaningful, so you can remember it easily for the access of websites.
‧Domain
It is a subnet work composed of a group of clients and servers.
‧DoS (Denial of Service)
Denial of Service attacks network devices and try to disable the devices.
‧Dynamic IP Address
Dynamic IP Address is automatically assigned to a client in a TCP/IP network by a DHCP server in the network.
‧Ethernet
It is a common LAN protocol defined as the 802.3 standard by IEEE (Institute of Electrical and Electronics Engineers). All clients in the network share the total bandwidth. It could be 10 Mbps (Ethernet), 100 Mbps (Fast Ethernet) or 1000 Mbps (Gigabit Ethernet).
‧FTP (File Transfer Protocol)
Page 52