Zonet Technology ZSR0104C Series user manual Firmware Upgrade, Pre-requirements

Page 27

5.5 Firmware Upgrade

A web-based interface, via Microsoft Internet Explore or Netscape web browser, is provided to allow the user upgrade the latest firmware to the NAT Router. The firmware upgrade could be executed from LAN site (local upgrade) or from WAN site (remote upgrade)

Pre-requirements

•A copy of the latest firmware of NAT router

•A computer (Window-based, Unix-based or Mac-based) runs the web browser either Internet Explore or Netscape and holds the latest firmware of the NAT router

•The network connection from the computer to the NAT router, which is targeted for the firmware upgrade. To make a local network connection, user can plug one end of Ethernet cable into the computer’s Ethernet port and the other end of cable to the NAT router’s one of four LAN ports.

Step 1. Click the “Upgrade” button at the side bar, the Firmware Upgrade pages appears.

Step 2. Enter the latest firmware name and including the path into firmware file name field or click the Browse icon.

If the Browse icon was clicked, the “Choose file” screen will appear.

Page 20

Image 27

Contents ZSR0104C Series FCC Interference Statement LAN Specifications of ZSR0104C SeriesTable of Contents Advanced Setup of ZSR0104C Series Appendix a Page Introduction ZSR0104C Series Broadband Switch RouterPhysical Features of ZSR0104C Series Non-Physical Features of ZSR0104C Series‧ VPN Pass-Through ‧ Firewall‧ Dynamic DNS ‧ Virtual Server Port ForwardingPackage Checklist Installation RequirementsAbout this User’s Manual Get to Know the Hardware Install Your ZSR0104C SeriesConfigure Your ZSR0104C Series Organization of This User’s Manual IntroductionLED Indicators Get to Know The HardwareZSR0104CP Front Panel ZSR0104C Front Panel Internet WAN Port Reset ButtonBack Panel Local LAN PortsConnect Client PC to ZSR0104C Series Install Your ZSR0104C SeriesConnect Ethernet Hub/Switch to ZSR0104C Series Connect Wireless Access Point to ZSR0104C SeriesCheck the Web Proxy Power up ZSR0104C SeriesWizard Setup Use Your ZSR0104C SeriesAdministration in Configure Your ZSR0104C Series Page Cable Modem Connection Fixed-IP xDSL Connection PPP over Ethernet PPPoE Connection Pptp Connection Page Advanced Setup of ZSR0104C WAN Setup CompleteStart from Advanced Setting System Administration Default Time Server IP Address is 198.123.30.132Time WAN Side Administration Change Administrator’s User Name and PasswordPre-requirements Firmware UpgradePage Reset Dynamic DNS Domain Name System Page Auto-Remember Dhcp ServerDhcp Definition Dhcp Server in LANDhcp IP Address Lease Time Dhcp Client in LANStatic IP Assign Pool Range of Assigned IP AddressConfigure TCP/IP in Your PC Virtual Server Port ForwardingDhcp Client List Page DMZ Host Configuration FirewallLocal DMZ Host Public DMZ Host Anti Ping and TCP/UDP Echo Attack Blocking the following port DisableURL Filter Port FilterForwarding the following Mac only MAC FilterPlease refer to Appendix B Common Port Numbers Blocking the following MacTroubleshooting IP FilterBlocking the following IP Failed Connection between ZSR0104C Series and Client PC Router’s Hardware FailureForget Passwords? Failed Connection on ZSR0104C Series WAN SideDNS Domain Name System Failure Internet Explorer Disable Web ProxyAppendix a For Windows 95 / 98 / ME / 2000 /NTFigure A-23 Figure A-25 NetscapeFigure A-26 For Windows XPFigure A-29 Figure A-31 For MAC For Unix/LinuxExplorer For Windows 95 / 98 / ME Verify IP SettingsFigure A-36 Figure A-38 For Windows 2000 /NTFigure A-40 Figure A-43 Figure A-44 For Unix/Linux Appendix B Common Port Numbers Port Number Service NameAppendix C Terminology ‧ Hardware ‧ Infrastructure Mode‧ Firmware ‧ Gateway‧ Port ‧ IP Address‧ MSN Messenger ‧ NetMeeting‧ Server ‧ RJ-45 Connector‧ Switch ‧ RouterAppendix D Technical Support Hardware ProblemSoftware Download Installation/Application Problem ‧ Wireless LAN