Asante Technologies 1016-IQ user manual Accessing the Device

Accessing the Device

❏Type the lowest (beginning) IP address on your network in the Low IP Address field.

❏Type the highest (last) IP address on your network in the Hi IP Address field.

❏Select New in the Discovery Mode field to create a new map.

5 Click Apply.

IntraSpection builds a map of your network. The map con- sists of icons which represent each “discovered” SNMP device on the network. Figure 3-1 is an example map.

Device Symbol

Device Icon

Figure 3-1 Discovered network map

6 After the map is complete, click once on the map icon (located at the bottom of the page on the naviga- tion bar) to validate the devices on the map.

ΔNote: The devices on the map are validated when device symbols appear on certain icons (see Figure 3-1). Note that not all icons have a device symbol.

7 Click once on the AsantéHub 1016-IQ’s icon.

ΔNote: This icon is labeled “Asanté” and has a “repeater” device symbol. It also has the AsantéHub 1016-IQ’s IP address below it.

The Device Page for the AsantéHub 1016-IQ appears (see Figure 3-2 on page 3-3).

Page 3-2