Asante Technologies 1016-IQ user manual Node Summary

Page 64

Menus

Node Summary

This menu provides IP mapping information (a summary of node activ- ity) on the device.

Table 5-12 describes each ﬁeld in the Node Summary menu.

ΔNote: For instructions on using this menu, see “Viewing Node Summary Information” on page 4-21.

	Table 5-12 Node Summary Menu

Field	Description

NodeAgingTimer	Conﬁgurable ﬁeld; speciﬁes the amount of time (in sec-
	onds) to keep the node entry in the table. This value can
	be any number, including :
	❏ -1— prevents the table from updating. When
	this value is entered in the Node Aging Timer
	ﬁeld, the value “4,294,967,295” is displayed.
	❏ 0 — entries are not deleted from the table
	Note: The amount of time is rounded to the nearest
	minute.

Group	Read-only ﬁeld; displays the number of the group.

Port	Read-only ﬁeld; displays the number of the port on the
	group.

Last IP Address	Read-only ﬁeld; displays the last known IP address that is
	associated with the port.

Last Physical	Read-only ﬁeld; displays the last MAC address associated
Address	with the port.

Number of	Read-only ﬁeld; displays the number of addresses
Addresses	received on the port.

Page 5-18

Image 64

Contents IntraSpection Personality Module Copyright Notice Table of Contents Index Index-i Chapter Contents About This ManualDocument Conventions AudienceIntroduction AsantéHub 1016-IQ Personality ModuleManagement Options Server System RequirementsClient Installation Installing a Personality ModuleInstallation Installing a Personality Module Accessing the Device Accessing the DeviceAccessing the Device Device Information Device Page ComponentsImage Front Panel Image Front-panel image componentsSelecting the Device for Management Selecting an ItemMenu Components TablesTable Columns ButtonsManagement Performing Basic Management FunctionsConﬁguration Tasks Management TasksManagement Setting Community Strings IntraSpection navigation barIntraSpection Map Manager Conﬁguring Network Access Parameters Network Information TableConﬁguring Device Identiﬁcation Information Click IdentifyUpdating the Device Click ValidateViewing General Device Information Device Information TablePerforming a Software Upgrade Click SWUpgradeEnabling/Disabling Ports Enabling/Disabling Ports Partitioning a Port Click PartitionResetting the AsantéHub 1016-IQ 10 Device Reset TableManagement Enabling Authentication Traps 12 Agent Information TablePage Deleting a Trap Receiver Entry Setting Alarms Click ThresholdSetting Alarms Deleting an Alarm Viewing Node Summary Information Click Node SummaryManagement Setting Port Security Click Port SecurityManagement Viewing Statistics Table StatisticsManagement Graph Statistics Management Menus Reset Menu Description ControlPartition ThresholdIdentify Device Modules Ports PortPort Type Link StatusAdmin State Field Description Jabber StatusJabber State Polarity StatusAgent Network SWUpgrade Field Description Remote Boot ProtocolReset Field Description Reset AgentPartition Field Description Group NumberPort Number ActionThreshold Field Description IndexStatus Target DomainTarget Subject Field Description TPort target portSample Type Field Description Startup Event Threshold ValueDetected Value Rising EventDeﬁned the entry eight-byte octect Node Summary Field Description Sampling Interval ObjectsField Description CollisionsGraph Port Security Allowed AddressPort Security Field Description Violation ActionTrap Receivers Field Description StatusTrap Receiver Community StringTechnical Support Technical Support HoursIndex NumericsSee also device Index-iii Odbc Index-v Index-vi