Asante Technologies 1016-IQ Field Description Jabber Status, Jabber State, Polarity Status

Page 53

 

Ports

 

 

 

Field

Description

 

 

 

 

Jabber Status

Read-only field; displays the status of the Jabber Detec-

 

tor.

 

Note: A Jabber Detector is a device that helps prevent a

 

node from transmitting constantly; for example, if the

 

node is malfunctioning.

 

on — jabber detector is on.

 

off — jabber detector is off.

 

 

 

Jabber State

Configurable field; enables or disables the jabber detec-

 

tion test.

 

 

 

Polarity Status

Read-only field; displays the status of the auto polarity

 

check.

 

normal — the auto polarity checking is enabled

 

and the polarity status is normal.

 

reversed — the auto polarity checking is enabled

 

and the polarity status is reversed.

 

 

 

Polarity State

Configurable field; determines the state of the device’s

 

auto polarity correction.

 

Auto polarity correction allows a hub to make electrical

 

corrections automatically if a cable does not reverse

 

polarity within its pairs.

 

 

 

Admin State

Configurable field; determines the state of the port.

 

enabled — the port is enabled and can receive

 

packets.

 

disabled — the port is disabled and cannot

 

receive packets.

 

 

 

Page 5-7

Image 53
Contents IntraSpection Personality Module Copyright Notice Table of Contents Index Index-i About This Manual Chapter ContentsAudience Document ConventionsAsantéHub 1016-IQ Personality Module IntroductionManagement Options Client System RequirementsServer Installing a Personality Module InstallationInstallation Installing a Personality Module Accessing the Device Accessing the DeviceAccessing the Device Image Device Page ComponentsDevice Information Front-panel image components Front Panel ImageSelecting an Item Selecting the Device for ManagementTables Menu ComponentsTable Columns ButtonsPerforming Basic Management Functions ManagementConfiguration Tasks Management TasksManagement IntraSpection navigation bar Setting Community StringsIntraSpection Map Manager Network Information Table Configuring Network Access ParametersClick Identify Configuring Device Identification InformationClick Validate Updating the DeviceDevice Information Table Viewing General Device InformationClick SWUpgrade Performing a Software UpgradeEnabling/Disabling Ports Enabling/Disabling Ports Click Partition Partitioning a Port10 Device Reset Table Resetting the AsantéHub 1016-IQManagement 12 Agent Information Table Enabling Authentication TrapsPage Deleting a Trap Receiver Entry Click Threshold Setting AlarmsSetting Alarms Deleting an Alarm Click Node Summary Viewing Node Summary InformationManagement Click Port Security Setting Port SecurityManagement Table Statistics Viewing StatisticsManagement Graph Statistics Management Menus Menu Description Control ResetPartition ThresholdIdentify Device Modules Port PortsPort Type Link StatusField Description Jabber Status Admin StateJabber State Polarity StatusAgent Network SWUpgrade Protocol Field Description Remote BootField Description Reset Agent ResetField Description Group Number PartitionPort Number ActionField Description Index ThresholdStatus Target DomainSample Type Field Description TPort target portTarget Subject Threshold Value Field Description Startup EventDetected Value Rising EventDefined the entry eight-byte octect Node Summary Objects Field Description Sampling IntervalCollisions Field DescriptionGraph Allowed Address Port SecurityField Description Violation Action Port SecurityField Description Status Trap ReceiversTrap Receiver Community StringTechnical Support Hours Technical SupportNumerics IndexSee also device Index-iii Odbc Index-v Index-vi