Asante Technologies 1016-IQ user manual Setting Alarms

		Setting Alarms
Table 4-1 Alarm Threshold fields
Field	Description	Action
Index	Displays the number of the	This field is read-only; it
	alarm entry.	cannot be edited.
Status	The status of the alarm	Select valid to add an
	entry.	alarm or invalid to delete
		the alarm.
Target Domain	The portion of the device	Select hub, port, or group
	for which the alarm is to	from the drop-down
	be set.	menu.
TGroup	The number of the group	Enter a group number if
	for which the alarm is to	group was selected as the
	be set.	Target Domain.
TPort	The number of the port for	Enter a port number if port
	which the alarm is to be	was selected as the Target
	set.	Domain.
Target Subject	The counter to be polled	Select a counter from the
	for the alarm.	drop-down menu.
		See “Target Subject” on
		page 5-15 for a descrip-
		tion of each counter.
Sample Type	The unit of measure for	This field cannot be edited;
	the alarm.	it is always set to event-
		persecond.
Startup Event	Determines when the	Select rising, falling, or ris-
	alarm is to be triggered.	ingANDfalling from the
		drop-down menu.
		See “Startup Event” on
		page 5-16 for a descrip-
		tion of each event.
Threshold	The value that triggers the	Enter an integer.
Value	alarm.
Detected Value	Displays the last measure-	This field is read-only; it
	ment made.	cannot be edited.
Rising Event	The response to occur for	Select a response from the
	a triggered rising event.	drop-down menu.
		See “Rising Event” on
		page 5-16 for a descrip-
		tion of each response.
Falling Event	The response to occur for	Select a response from the
	a triggered falling event.	drop-down menu.
		See “Falling Event” on
		page 5-16 for a descrip-
		tion of each response.

Page 4-19