Asante Technologies 1016-IQ user manual Identify

Identify

Configuration

This menu is not a management option; it is a title for the sub-menus listed below it. This menu cannot be selected.

Identify

This menu provides read-only and configurable identification informa- tion for the device.

Table 5-2 describes each field in the Identify menu.

ΔNote: For instructions on using this menu, see “Config- uring Device Identification Information” on page 4-6.

	Table 5-2 Identify Menu
Field	Description
Physical Address	Read-only field; displays the device’s hardware address.
Object ID	Read-only field; displays the device’s SNMP identifying
	number.
Description	Read-only field; displays a description of the device.
Name	Configurable field; assigns a name to the device.
	Note: A maximum of 254 characters (including spaces) is
	allowed.
Location	Configurable field; assigns a location to the device (where
	the device is physically located).
	Note: A maximum of 254 characters (including spaces) is
	allowed.
Contact	Configurable field; assigns a name of the person respon-
	sible for the device.
	Note: A maximum of 254 characters (including spaces) is
	allowed.
Up Time	Read-only field; displays the amount of time the device
	has been operational since the last time it was off-line.
Interfaces	Read-only field; displays the number of network inter-
	faces present on this device.

Page 5-3