Asante Technologies 1016-IQ user manual Network

Page 55

Network

Network

This menu provides conﬁgurable network access information for the device. This information is needed to access the device across the net- work (in-band management).

Table 5-7 describes each ﬁeld in the Network menu.

▲Important: If you change the IP address, subnet mask, or default gateway, the AsantéHub 1016-IQ needs to be reset in order for the changes to take effect. See “Resetting the AsantéHub 1016-IQ ” on page 4-13 for instructions.

ΔNote: For instructions on using this menu, see “Conﬁgur- ing Network Access Parameters” on page 4-5.

	Table 5-7 Network Menu

Field	Description

Agent’s IP Address	Conﬁgurable ﬁeld; determines the device’s IP address.

Subnet Mask	Conﬁgurable ﬁeld; determines the subnet address of the
	device.
	Note: A subnet mask, in the IP addressing scheme, is a
	group of selected bits whose values serve to identify a
	subnetwork. All members of the subnetwork share the
	mask value.

Default Gateway	Conﬁgurable ﬁeld; determines the address of the default
	gateway (router) to which the device belongs.

Boot Server	Conﬁgurable ﬁeld; determines the IP address of the boot
	server that was used for booting the IP agent.

Dial String	Conﬁgurable ﬁeld; determines the initialization string
	used by the network management station to establish an
	out-of-band connection with the device.

Out of Band Rate	Conﬁgurable ﬁeld; determines the baud rate for access-
	ing the device via out-of-band management.
	The default is 9600.

Page 5-9

Image 55

Contents IntraSpection Personality Module Copyright Notice Table of Contents Index Index-i About This Manual Chapter ContentsAudience Document ConventionsAsantéHub 1016-IQ Personality Module IntroductionManagement Options Server System RequirementsClient Installing a Personality Module InstallationInstallation Installing a Personality Module Accessing the Device Accessing the DeviceAccessing the Device Device Information Device Page ComponentsImage Front-panel image components Front Panel ImageSelecting an Item Selecting the Device for ManagementButtons Menu ComponentsTables Table ColumnsManagement Tasks ManagementPerforming Basic Management Functions Conﬁguration TasksManagement IntraSpection navigation bar Setting Community StringsIntraSpection Map Manager Network Information Table Conﬁguring Network Access ParametersClick Identify Conﬁguring Device Identiﬁcation InformationClick Validate Updating the DeviceDevice Information Table Viewing General Device InformationClick SWUpgrade Performing a Software UpgradeEnabling/Disabling Ports Enabling/Disabling Ports Click Partition Partitioning a Port10 Device Reset Table Resetting the AsantéHub 1016-IQManagement 12 Agent Information Table Enabling Authentication TrapsPage Deleting a Trap Receiver Entry Click Threshold Setting AlarmsSetting Alarms Deleting an Alarm Click Node Summary Viewing Node Summary InformationManagement Click Port Security Setting Port SecurityManagement Table Statistics Viewing StatisticsManagement Graph Statistics Management Menus Threshold ResetMenu Description Control PartitionIdentify Device Modules Link Status PortsPort Port TypePolarity Status Admin StateField Description Jabber Status Jabber StateAgent Network SWUpgrade Protocol Field Description Remote BootField Description Reset Agent ResetAction PartitionField Description Group Number Port NumberTarget Domain ThresholdField Description Index StatusTarget Subject Field Description TPort target portSample Type Rising Event Field Description Startup EventThreshold Value Detected ValueDeﬁned the entry eight-byte octect Node Summary Objects Field Description Sampling IntervalCollisions Field DescriptionGraph Allowed Address Port SecurityField Description Violation Action Port SecurityCommunity String Trap ReceiversField Description Status Trap ReceiverTechnical Support Hours Technical SupportNumerics IndexSee also device Index-iii Odbc Index-v Index-vi