Cable Connections to Other Devices
5
6
7
ΔIf you are managing only one hub, set DIP Switch 1 DOWN (END).
Set DIP Switch 2 DOWN (SETUP) on all hubs.
If you change a DIP switch setting, you must reset the hub or NMM. Press the Reset button.
To connect an AsantéView Management Station to a hub, follow the instructions in "Connecting a Manage- ment Station to the Hub" on page 13.
For a summary of DIP switch settings, see Figure 6 on page 15 and Figure 7 on page 16.
RJ45 |
Mac or PC |
AMS Link |
Extender |
to Mac or PC |
AsantéView |
Management |
Station (AMS) |
DIP Switch 2 DOWN (SETUP) on all hubs
Hub 1 | 1 2 |
DIP Switch 1 UP (THROUGH)
on all other hubs
Hub 2 | 1 | 2 |
|
|
DIP Switch 1 DOWN (END) on end hub only
End Hub | 1 2 |
Figure 4 Connecting hubs in an Out-of-Band daisy-chain
Connecting a To connect an AsantéView Management Station to the hub: Management Station to
the Hub
1 | Connect one end of the AMS Link Extender to a PC or |
| Macintosh and the other end to an AMS Link connec- |
tor port. Figure 5 shows how to make this connec- tion.
Page 13