Asante Technologies 2072 manual Using AsantéTerm, AsantéTerm Icon

Page 20

Using AsantéTerm

Using AsantéTerm AsantéTerm, provided with AsantéView In-Band and Out-of-Band, can be used to interrogate and program an Asanté hub using the Macintosh as a terminal.

Installing AsantéTerm Follow this procedure to install AsantéTerm.

1	Insert the AsantéView disk into the floppy drive and
	double-click the disk icon to open it.
2	Copy the AsantéTerm program to your hard drive.The
	icon looks like the one shown in Figure 11.

Figure 11 AsantéTerm Icon

Running AsantéTerm To start AsantéTerm, use the following procedure.

1

2

Double-click the AsantéTerm icon.

AsantéTerm opens the terminal window.There may not be any data displayed in the window after opening it.

Press return to start communication with the hub.

Figure 12 shows the screen that appears for interro- gating and programming an AsantéHub 2072.

Page 19

Image 20

Contents AsantéHub 2072 Network Management Module Installation Guide AsantéHub Network Management Module Installation Guide AsantéHub 2072 Network Management Module Installation Guide Asking for AssistanceTell Us What You Think Tell Us What You ThinkIntroducing Network Management Module AH2072NMMIntroducing the Network Management Module Grounding Requirements Checking Package Contents Installation Segment ControlDIP Switch Front Panel Function of NMM Front Panel ComponentsAsanteview OUT-OF Front Panel AMS Link Connecting Hubs in an Out-of-Band Daisy-Chain Cable Connections to Other DevicesCable Connections to Other Devices HubSummary of DIP Switch Settings DIP switch settings for Out-of-Band using AMS Link Connecting a Modem to the Hub ConfigurationUsing the Local Management Port RS232/AMS Link Conﬁguration DIP Switch SettingConnect a straight-through RS232 cable to the RS232 Using AsantéTerm AsantéTerm IconAsanté Remote Management System Main Menu using AsantéTerm Using Telnet Upgrading the Hub Image Code Icon for NCSA/BYU Telnet 2.5 MacintoshClick the OK button. shows the Asanté Using the Asanté Remote Management System General GuidelinesUsing the Asanté Remote Management System Asanté Remote Management System Menu TutorialExample General Conﬁguration Screen Type the password Asante the password is case-sensi Type a from the Conﬁguration menu.This takes you to Type Ofﬁce Hub 2072 or a different name if you wish Press q to return to the Conﬁguration menu Conﬁguration Menu Accessing the Conﬁguration MenuConﬁguration Menu System Administration Information Group Parameters Console Password Reset System Type c for Console Password Type the new password a second time and press An Example for Segmenting the Network Segment ControlSegment Control Selecting a Slot for Segment ChangeIsolating Modules from the Network Segment LED StatesTechnical Speciﬁcations Technical SpeciﬁcationsRS232 Connections Index IndexEeprom MIB Snmp