AT&T 76450 Consistent Terminology throughout Documentation, Revision Numbering, Revision History

Page 23

Common Systems Connection Standards	AT&T Services, Inc
Date: August 31, 2007	ATT-TP-76450, Issue 9

7.9Consistent Terminology throughout Documentation

Per GR-454-CORE, Section 2.4, terminology must remain consistent throughout all documentation for a platform.

Example: Maintenance Mode must remain Maintenance Mode and not vary to Maintenance Condition or Maintenance State

7.10Consistent Terminology between Documentation and Platform.

Per GR-454-CORE, Section 2.4, terminology must be consistent between the documentation and the platform.

Example: If it is referred to as Maintenance Mode in the documentation it must be Maintenance Mode in the Craft and EMS GUIs.

7.11Revision Numbering

Documentation shall be clearly marked on each page with Revision numbers to indicate when changes are made within the document.

7.12Revision History

A revision history section shall be included to clearly indicate what and where changes are made within the document.

7.13Documentation Submitted for Review

The following shall be submitted with the TP7650-001 Check list.

7.13.1Excerpts from Documentation

Forward excerpts of documentation for the following detail procedures:

a)Initial shelf activation to include Log-on, Setting IP and Sub-net,

b)Card insertion and system recognition

c)Switch-over from Working to Standby circuits

Copyright ©2004 – 2006, AT&T Knowledge Ventures

All rights reserved

Page 23

Image 23

Contents Canceled/Superseded Doc N/A Pre-assembled versus Field Assembled Network Equipment RequirementsPurpose ScopeAdditional AT&T Requirements ATT-TP-76450 Internet Web Site Product Evaluation ProcessAdherence to AT&T Standard Suppliers Reasons for ReissueNominal -48v DC AC Powered EquipmentRedundant Power Feeds Power FeedsList 1X Drain Battery Return ConductorDrain Definitions List 1 DrainTwo Hole Connections Location of Power Terminations1 16 AWG Stranded Power Cable and Larger Size conductor Acceptable termination Associated Listings 3 18 AWG Power Cable and SmallerVisual Power Alarms and Status Indicator Power Distribution Delivery Fusing of CapacitorsIndividually Mounted PDU NE Integrated Power DistributionDirect Bdfb Power Delivery Standards Redundancy of timing inputs Synchronization/Timing StandardsTermination of timing leads Clock output lead cablingOutput card exhaustion AlarmsTL1 / TCP-IP TBOS/TABS Fiber Attenuators FiberSee Figure Copper DS1 Cross-Connect Wire Central Office Copper Wire and Cable Softcopy Documentation Vendor DocumentationUnusual Cable Types Protection of Cable and JumpersPersonnel Injury and Equipment Damage Warnings Alarm/Trouble Shooting GuideHard Copy Documentation Craft Interface InstructionsRevision History Consistent Terminology throughout DocumentationConsistent Terminology between Documentation and Platform Revision NumberingTest Streaker Cards Other interconnection requirementsList of Documentation Equipment lightingProcess Appendix a ATT-TP-76450 Checklist Instructions and ProcessInstructions Page Power Interconnection Standards Alarm Standards Part & N/A Footnotes Rqmt# Comment Vendor DocumentationDocument Number Document Description Appendix C ReferencesAppendix E Acronyms Appendix D ATT Contact List