Dynalink RTA770W user manual USB Driver Installation, For Windows ME

Page 16

ADSL Router User Manaul

Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power outlet.

Turn on the power switch.

USB Driver Installation

If the ADSL Router is connected to a PC through USB interface, you will be prompted for the USB drivers when plugging the USB cable to the PC. Refer to the relevant operating system to install the USB drivers. Otherwise, you may skip this chapter.

Note: This section is for the model with USB interface only. If your router does not support USB interface, please skip this section.

For Windows ME

Run the USB installation program from the CD provided by your router package. An InstallShield Wizard will appear. Please wait for a moment.

When the InstallShield Wizard Complete appears, click Finish.

Plug the USB cable between your router and PC.

Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on.

The USB driver installation finished. You can use the router now.

For Windows 2000

Run the USB installation program from the CD provided by your router package. An InstallShield Wizard will appear. Please wait for a moment.

When the welcome screen appears, click Next for next step.

When the InstallShield Wizard Complete appears, click Finish.

Plug the USB cable between your router and PC.

Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on.

The system will detect the USB driver automatically. When the system detects it, a dialog

4

Image 16
Contents Adsl Router/Modem 000230-rta Safety Notes Page Contents Chapter Vii Viii Features ATM FeaturesBridging Features Adsl ComplianceSecurity Features Routing FeaturesWireless LAN Compliance Features Configuration and Management Subscription for Adsl ServiceUnpacking Xii Physical Outlook LED IndicatorsFront Panel Rear Panel DiagConnecting the Adsl Router Choosing a place for the Adsl RouterFor Windows ME USB Driver InstallationFor Windows Uninstall the USB Driver For Windows XPFor Windows XP Configuration Setting TCP/IP on Client PCHighlight Protocol and click Add On IP Address tab Adsl Router User Manaul For Windows ME For Windows NT Configuration Adsl Router User Manaul For Windows Adsl Router User Manaul For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Web Configuration Using Web-Based ManagerTo Have the New Settings Take Effect Outline of Web ManagerQuick Setup Quick StartConnect to Internet Connection TypePPP over ATM/ PPP over Ethernet Primary IP Address Subnet MaskEnd IP Address Leased TimeMAC Encapsulated Routing MER Subnet Mask None IP over ATMSecondary DNS server Secondary IP Address Bridging Status OverviewAdsl Line Adsl BER TestTraffic Statistics Internet ConnectionDhcp Table Routing Table Wireless ClientARP Table Advanced Setup LAN- IP AddressLAN-DHCP Server ApplyWAN Internet Setting WAN Adsl Settings Adding a New OneVPI Virtual Path Identifier ModulationIP Routing Static Route Remove Static RouteConfiguring Other Routers on Your LAN Local RouterEnabled IP Routing Dynamic RoutingDNS Server Adsl RouterNAT Virtual Servers IP Address seen by Internet UsersSelect from the following list Customized serviceProtocol NAT DMZ Host Connecting to the Virtual ServersNAT Dynamic DNS Dynamic DNS: User Name: Password: Domain Name: Status:Internet Connection: IP Filtering FirewallSelect the direction to filter packets Source/Destination IP address Allow TrafficPort Range Igmp Proxy Igmp Proxy Enabled Internet ConnectionWireless BasicAdsl Router User Manaul WiFi-Protected Access The None item Authentication TypeSecurity For None WPAFormat Default Transmission KeyKey 1 to For 802.1X Wireless Network Example for Configuration 802.1x environment For WPA-PSK For WPA Wi-Fi Protected Access Access Control Access ControlMAC Address of Wireless Diagnostics Remote Access Admin AccountManagement Date and Time Configure System LogSystem Log Viewing System Log View System Log buttonSnmp Setting Update Firmware Backup ConfigReset Router UPnP for XP Web Configuration Adsl Router User Manaul Connection Mode Configuration PPP over ATM PPPoA ModeDescription Check PPP IP extension then click Next PPP over ATM PPPoA IP Extension ModePrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Adsl Router User Manaul Primary DNS server Secondary DNS server Unnumbered IP over ATM IPoAIP Address Subnet Mask Gateway Unnumbered IP over ATM IPoA+NAT Adsl Router User Manaul Bridge Mode Adsl Router User Manaul Problems with LAN Problems with WANProblems with Upgrading Glossary NAT Network Address Translation IP Address VPI Virtual Path Identifier & VCI Virtual Channel Identifier Adsl Router User Manaul Specifications SoftwareVDC Hardware Adsl Router User Manaul Server Setup for 802.1x Client Getting Client CertificateYes Appendix B Server Setup for 802.1x Client Adsl Router User Manaul
Related manuals
Manual 18 pages 13.82 Kb Manual 16 pages 3.39 Kb

RTA770W, RTA770 specifications

The Dynalink RTA770 is a versatile and powerful router designed to meet the demands of modern home and small business networking. Recognized for its reliability and performance, the RTA770 incorporates advanced technologies that enhance connectivity and overall user experience.

One of the main features of the RTA770 is its dual-band capability, offering simultaneous 2.4 GHz and 5 GHz frequency bands. The dual-band functionality allows for greater flexibility in network connections, reducing interference and optimizing performance. The 2.4 GHz band is ideal for devices like smartphones, tablets, and smart home devices that require a stable signal over longer distances. Conversely, the 5 GHz band caters to bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing, providing faster speeds with reduced latency.

The RTA770 is equipped with the latest Wi-Fi 6 technology, which significantly boosts speed and efficiency. Wi-Fi 6, also known as 802.11ax, enhances wireless throughput, allowing multiple devices to connect simultaneously without compromising on performance. This is especially beneficial for households with numerous smart devices and users, ensuring a seamless online experience.

Security is a prominent consideration in the design of the RTA770. It features advanced encryption protocols, including WPA3, which offers improved protection against unauthorized access and ensures that personal information remains secure while browsing the internet. The router also supports guest network capability, allowing visitors to access the internet without exposing the primary network.

In terms of connectivity, the RTA770 boasts several ports including Gigabit Ethernet ports that facilitate wired connections for devices such as gaming consoles, smart TVs, and computers. This ensures optimal network performance for devices that require stable connections.

Furthermore, the Dynalink RTA770 includes an easy-to-use web interface for quick setup and management of network settings. Users can conveniently monitor connected devices, configure parental controls, and manage bandwidth allocation.

Overall, the Dynalink RTA770 stands out as a robust networking solution, combining dual-band performance, cutting-edge Wi-Fi 6 technology, enhanced security features, and user-friendly management tools. This makes it a compelling choice for both home users and small businesses looking to improve their network infrastructure.