Dynalink RTA770W user manual Problems with Upgrading

Page 98

ADSL Router User Manaul

DNS IP is 168.95.1.1, then ping 168.95.1.1. If the following response occurs:

Relay from 168.95.1.1 bytes=32 time=100ms TTL=253

Then the connection to the DNS is OK.

If you get a failed ping with the response of:

Request time out

Then the DNS is not reachable. Check your DNS setting on the ADSL Router.

Problems with Upgrading

The following lists the error messages that you may see during upgrading and the action to take.

Error: All the ADSL LEDs light up and cannot light off as usual.

Possible cause: When users execute firmware upgrade and save settings to the router, the power for the router is lost for some unknown reasons, the normal web page for the router might be damaged. After power on your router, the LEDs might not work normally.

Action: Use the browser to connect to the router for executing image upgrade.

Error Message: Image uploading failed. The selected file contains an illegal image.

Possible cause: The firmware file format is invalid.

Action: Check the file format is correct, otherwise download a firmware file with correct format.

Error Message: Image uploading failed. The system is out of memory.

Possible cause: It may be caused by the lack of memory.

Action: Reboot your ADSL Router and perform the upgrade task again.

Error Message: Image uploading failed. No image file was selected.

Possible cause: You did not select a file correctly.

Action: Download a compatible firmware from the web.

86

Image 98
Contents Adsl Router/Modem 000230-rta Safety Notes Page Contents Chapter Vii Viii Bridging Features FeaturesATM Features Adsl ComplianceWireless LAN Compliance Features Routing FeaturesSecurity Features Unpacking Subscription for Adsl ServiceConfiguration and Management Xii Front Panel LED IndicatorsPhysical Outlook Rear Panel DiagConnecting the Adsl Router Choosing a place for the Adsl RouterFor Windows USB Driver InstallationFor Windows ME Uninstall the USB Driver For Windows XPFor Windows XP Configuration Setting TCP/IP on Client PCHighlight Protocol and click Add On IP Address tab Adsl Router User Manaul For Windows ME For Windows NT Configuration Adsl Router User Manaul For Windows Adsl Router User Manaul For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Web Configuration Using Web-Based ManagerTo Have the New Settings Take Effect Outline of Web ManagerConnect to Internet Quick SetupQuick Start Connection TypePPP over ATM/ PPP over Ethernet End IP Address Primary IP AddressSubnet Mask Leased TimeMAC Encapsulated Routing MER Subnet Mask Secondary DNS server IP over ATMNone Secondary IP Address Bridging Status OverviewAdsl Line Adsl BER TestDhcp Table Internet ConnectionTraffic Statistics ARP Table Wireless ClientRouting Table LAN-DHCP Server Advanced SetupLAN- IP Address ApplyWAN Internet Setting VPI Virtual Path Identifier WAN Adsl SettingsAdding a New One ModulationIP Routing Static Route Remove Static RouteConfiguring Other Routers on Your LAN Local RouterDNS Server EnabledIP Routing Dynamic Routing Adsl RouterNAT Virtual Servers IP Address seen by Internet UsersProtocol Customized serviceSelect from the following list NAT Dynamic DNS Connecting to the Virtual ServersNAT DMZ Host Internet Connection: User Name: Password: Domain Name: Status:Dynamic DNS: Select the direction to filter packets FirewallIP Filtering Port Range Allow TrafficSource/Destination IP address Igmp Proxy Igmp Proxy Enabled Internet ConnectionWireless BasicAdsl Router User Manaul Security WiFi-Protected Access The None itemAuthentication Type For None WPAKey 1 to Default Transmission KeyFormat For 802.1X Wireless Network Example for Configuration 802.1x environment For WPA-PSK For WPA Wi-Fi Protected Access MAC Address of Wireless Access ControlAccess Control Diagnostics Management Admin AccountRemote Access System Log Configure System LogDate and Time Viewing System Log View System Log buttonSnmp Setting Reset Router Backup ConfigUpdate Firmware UPnP for XP Web Configuration Adsl Router User Manaul Connection Mode Description PPP over ATM PPPoA ModeConfiguration Primary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over ATM PPPoA IP Extension ModeCheck PPP IP extension then click Next PPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Adsl Router User Manaul IP Address Unnumbered IP over ATM IPoAPrimary DNS server Secondary DNS server Subnet Mask Gateway Unnumbered IP over ATM IPoA+NAT Adsl Router User Manaul Bridge Mode Adsl Router User Manaul Problems with LAN Problems with WANProblems with Upgrading Glossary NAT Network Address Translation IP Address VPI Virtual Path Identifier & VCI Virtual Channel Identifier Adsl Router User Manaul Specifications SoftwareVDC Hardware Adsl Router User Manaul Server Setup for 802.1x Client Getting Client CertificateYes Appendix B Server Setup for 802.1x Client Adsl Router User Manaul
Related manuals
Manual 18 pages 13.82 Kb Manual 16 pages 3.39 Kb

RTA770W, RTA770 specifications

The Dynalink RTA770 is a versatile and powerful router designed to meet the demands of modern home and small business networking. Recognized for its reliability and performance, the RTA770 incorporates advanced technologies that enhance connectivity and overall user experience.

One of the main features of the RTA770 is its dual-band capability, offering simultaneous 2.4 GHz and 5 GHz frequency bands. The dual-band functionality allows for greater flexibility in network connections, reducing interference and optimizing performance. The 2.4 GHz band is ideal for devices like smartphones, tablets, and smart home devices that require a stable signal over longer distances. Conversely, the 5 GHz band caters to bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing, providing faster speeds with reduced latency.

The RTA770 is equipped with the latest Wi-Fi 6 technology, which significantly boosts speed and efficiency. Wi-Fi 6, also known as 802.11ax, enhances wireless throughput, allowing multiple devices to connect simultaneously without compromising on performance. This is especially beneficial for households with numerous smart devices and users, ensuring a seamless online experience.

Security is a prominent consideration in the design of the RTA770. It features advanced encryption protocols, including WPA3, which offers improved protection against unauthorized access and ensures that personal information remains secure while browsing the internet. The router also supports guest network capability, allowing visitors to access the internet without exposing the primary network.

In terms of connectivity, the RTA770 boasts several ports including Gigabit Ethernet ports that facilitate wired connections for devices such as gaming consoles, smart TVs, and computers. This ensures optimal network performance for devices that require stable connections.

Furthermore, the Dynalink RTA770 includes an easy-to-use web interface for quick setup and management of network settings. Users can conveniently monitor connected devices, configure parental controls, and manage bandwidth allocation.

Overall, the Dynalink RTA770 stands out as a robust networking solution, combining dual-band performance, cutting-edge Wi-Fi 6 technology, enhanced security features, and user-friendly management tools. This makes it a compelling choice for both home users and small businesses looking to improve their network infrastructure.