Dynalink RTA770W user manual Connection Mode

Page 81

Chapter 5:Connection Mode

Chapter 5

Connection Mode

Prior to configuring the ADSL Router, you must decide whether to configure the ADSL Router as a bridge or as a router. This chapter presents some deployment examples for your reference. Each mode includes its general configure procedures. For more detailed information about web configuration, refer to "Web Configuration".

PPPover ATM (PPPoA) PPPoA IP Extenstion PPP over Ethernet (PPPoE) PPPoE IP Extension MER Mode

Numbered IP over ATM (IPoA) Numbered IP over ATM (IPoA)+NAT Unnumbered IP over ATM (IPoA) Unnumbered IP over ATM (IPoA)+NAT Bridging

For making sure that you can connect the ADSL to your computer well and get into Internet successfully, please make sure the following first.

Make sure you have installed a network interface card into your computer. Make sure the connection between the ADSL and your computer is OK.

Check to see the TCP/IP protocol and set the IP address as “Auto Get IP Address”.

When you are sure all above is Ok, you can open the Browser and type in “192.168.1.1” and start to do the web configuration with different connection modes.

This chapter is going to introduce the function of each connection mode and tell you the basic configuring steps that you have to do. If you did not follow the configuring steps for using these connection modes, you might get some connection problems and cannot connect to Internet well.

69

Page 80 Page 82
Image 81
Page 80 Page 82
Contents Adsl Router/Modem 000230-rta Safety Notes Page Contents Chapter Vii Viii ATM Features FeaturesBridging Features Adsl ComplianceRouting Features Security FeaturesWireless LAN Compliance Features Subscription for Adsl Service Configuration and ManagementUnpacking Xii LED Indicators Physical OutlookFront Panel Diag Rear PanelChoosing a place for the Adsl Router Connecting the Adsl RouterUSB Driver Installation For Windows MEFor Windows For Windows XP Uninstall the USB DriverFor Windows XP Setting TCP/IP on Client PC ConfigurationHighlight Protocol and click Add On IP Address tab Adsl Router User Manaul For Windows ME For Windows NT Configuration Adsl Router User Manaul For Windows Adsl Router User Manaul For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK For Windows 98ME Renew IP Address on Client PCFor Windows NT For Windows Using Web-Based Manager Web ConfigurationOutline of Web Manager To Have the New Settings Take EffectQuick Start Quick SetupConnect to Internet Connection TypePPP over ATM/ PPP over Ethernet Subnet Mask Primary IP AddressEnd IP Address Leased TimeMAC Encapsulated Routing MER Subnet Mask IP over ATM NoneSecondary DNS server Secondary IP Address Bridging Overview StatusAdsl BER Test Adsl LineInternet Connection Traffic StatisticsDhcp Table Wireless Client Routing TableARP Table LAN- IP Address Advanced SetupLAN-DHCP Server ApplyWAN Internet Setting Adding a New One WAN Adsl SettingsVPI Virtual Path Identifier ModulationRemove Static Route IP Routing Static RouteLocal Router Configuring Other Routers on Your LANIP Routing Dynamic Routing EnabledDNS Server Adsl RouterIP Address seen by Internet Users NAT Virtual ServersCustomized service Select from the following listProtocol Connecting to the Virtual Servers NAT DMZ HostNAT Dynamic DNS User Name： Password： Domain Name： Status： Dynamic DNS：Internet Connection： Firewall IP FilteringSelect the direction to filter packets Allow Traffic Source/Destination IP addressPort Range Igmp Proxy Internet Connection Igmp Proxy EnabledBasic WirelessAdsl Router User Manaul Authentication Type WiFi-Protected Access The None itemSecurity For None WPADefault Transmission Key FormatKey 1 to For 802.1X Wireless Network Example for Configuration 802.1x environment For WPA-PSK For WPA Wi-Fi Protected Access Access Control Access ControlMAC Address of Wireless Diagnostics Admin Account Remote AccessManagement Configure System Log Date and TimeSystem Log View System Log button Viewing System LogSnmp Setting Backup Config Update FirmwareReset Router UPnP for XP Web Configuration Adsl Router User Manaul Connection Mode PPP over ATM PPPoA Mode ConfigurationDescription PPP over ATM PPPoA IP Extension Mode Check PPP IP extension then click NextPrimary IP address192.168.1.1 Subnet Mask255.255.255.0 ISP PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Adsl Router User Manaul Unnumbered IP over ATM IPoA Primary DNS server Secondary DNS serverIP Address Subnet Mask Gateway Unnumbered IP over ATM IPoA+NAT Adsl Router User Manaul Bridge Mode Adsl Router User Manaul Problems with WAN Problems with LANProblems with Upgrading Glossary NAT Network Address Translation IP Address VPI Virtual Path Identifier & VCI Virtual Channel Identifier Adsl Router User Manaul Software SpecificationsVDC Hardware Adsl Router User Manaul Getting Client Certificate Server Setup for 802.1x ClientYes Appendix B Server Setup for 802.1x Client Adsl Router User Manaul
Related manuals
Manual 18 pages 13.82 Kb Manual 16 pages 3.39 Kb

RTA770W, RTA770 specifications

The Dynalink RTA770 is a versatile and powerful router designed to meet the demands of modern home and small business networking. Recognized for its reliability and performance, the RTA770 incorporates advanced technologies that enhance connectivity and overall user experience.

One of the main features of the RTA770 is its dual-band capability, offering simultaneous 2.4 GHz and 5 GHz frequency bands. The dual-band functionality allows for greater flexibility in network connections, reducing interference and optimizing performance. The 2.4 GHz band is ideal for devices like smartphones, tablets, and smart home devices that require a stable signal over longer distances. Conversely, the 5 GHz band caters to bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing, providing faster speeds with reduced latency.

The RTA770 is equipped with the latest Wi-Fi 6 technology, which significantly boosts speed and efficiency. Wi-Fi 6, also known as 802.11ax, enhances wireless throughput, allowing multiple devices to connect simultaneously without compromising on performance. This is especially beneficial for households with numerous smart devices and users, ensuring a seamless online experience.

Security is a prominent consideration in the design of the RTA770. It features advanced encryption protocols, including WPA3, which offers improved protection against unauthorized access and ensures that personal information remains secure while browsing the internet. The router also supports guest network capability, allowing visitors to access the internet without exposing the primary network.

In terms of connectivity, the RTA770 boasts several ports including Gigabit Ethernet ports that facilitate wired connections for devices such as gaming consoles, smart TVs, and computers. This ensures optimal network performance for devices that require stable connections.

Furthermore, the Dynalink RTA770 includes an easy-to-use web interface for quick setup and management of network settings. Users can conveniently monitor connected devices, configure parental controls, and manage bandwidth allocation.

Overall, the Dynalink RTA770 stands out as a robust networking solution, combining dual-band performance, cutting-edge Wi-Fi 6 technology, enhanced security features, and user-friendly management tools. This makes it a compelling choice for both home users and small businesses looking to improve their network infrastructure.
Top Page Image Contents