Dynalink RTA770W user manual Subnet Mask

Page 41

Chapter 4: Web Configuration

Configure the second IP Address and Subnet Mask for LAN interface: Check this box to make another set of IP Address and Subnet Mask to connect to your router if they are not included in the range that DHCP server accepts.

Secondary IP Address:

Type in the second IP address that you got from your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from your ISP for your LAN connection.

Enable DHCP server on the LAN: Check this item if DHCP service is needed on the LAN. The router will assign IP address, gateway address for each of your PCs.

Start IP Address:

Type in the start point IP address.

End IP Address:

Type in the end point IP address.

Leased Time:

Type in the duration for the time. The default is 1day.

You can check it at this time. If you find something is incorrect, click Back to change the settings. If everything is OK, click Finish to accept these settings. And the following page will appear.

Now, the system will reboot to activate the new settings that you have done in this section.

Please wait for 2 minutes for restarting the router.

On the Configure LAN side Settings web page, the IP address and subnet mask will be shown on it. You can modify them if needed. Click Next for next page.

29

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Adsl Router/Modem 000230-rta Safety Notes Page Contents Chapter Vii Viii ATM Features FeaturesBridging Features Adsl ComplianceWireless LAN Compliance Features Routing FeaturesSecurity Features Unpacking Subscription for Adsl ServiceConfiguration and Management Xii Front Panel LED IndicatorsPhysical Outlook Diag Rear PanelChoosing a place for the Adsl Router Connecting the Adsl RouterFor Windows USB Driver InstallationFor Windows ME For Windows XP Uninstall the USB DriverFor Windows XP Setting TCP/IP on Client PC ConfigurationHighlight Protocol and click Add On IP Address tab Adsl Router User Manaul For Windows ME For Windows NT Configuration Adsl Router User Manaul For Windows Adsl Router User Manaul For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK For Windows 98ME Renew IP Address on Client PCFor Windows NT For Windows Using Web-Based Manager Web ConfigurationOutline of Web Manager To Have the New Settings Take EffectQuick Start Quick SetupConnect to Internet Connection TypePPP over ATM/ PPP over Ethernet Subnet Mask Primary IP AddressEnd IP Address Leased TimeMAC Encapsulated Routing MER Subnet Mask Secondary DNS server IP over ATMNone Secondary IP Address Bridging Overview StatusAdsl BER Test Adsl LineDhcp Table Internet ConnectionTraffic Statistics ARP Table Wireless ClientRouting Table LAN- IP Address Advanced SetupLAN-DHCP Server ApplyWAN Internet Setting Adding a New One WAN Adsl SettingsVPI Virtual Path Identifier ModulationRemove Static Route IP Routing Static RouteLocal Router Configuring Other Routers on Your LANIP Routing Dynamic Routing EnabledDNS Server Adsl RouterIP Address seen by Internet Users NAT Virtual ServersProtocol Customized serviceSelect from the following list NAT Dynamic DNS Connecting to the Virtual ServersNAT DMZ Host Internet Connection： User Name： Password： Domain Name： Status：Dynamic DNS： Select the direction to filter packets FirewallIP Filtering Port Range Allow TrafficSource/Destination IP address Igmp Proxy Internet Connection Igmp Proxy EnabledBasic WirelessAdsl Router User Manaul Authentication Type WiFi-Protected Access The None itemSecurity For None WPAKey 1 to Default Transmission KeyFormat For 802.1X Wireless Network Example for Configuration 802.1x environment For WPA-PSK For WPA Wi-Fi Protected Access MAC Address of Wireless Access ControlAccess Control Diagnostics Management Admin AccountRemote Access System Log Configure System LogDate and Time View System Log button Viewing System LogSnmp Setting Reset Router Backup ConfigUpdate Firmware UPnP for XP Web Configuration Adsl Router User Manaul Connection Mode Description PPP over ATM PPPoA ModeConfiguration Primary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over ATM PPPoA IP Extension ModeCheck PPP IP extension then click Next ISP PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Adsl Router User Manaul IP Address Unnumbered IP over ATM IPoAPrimary DNS server Secondary DNS server Subnet Mask Gateway Unnumbered IP over ATM IPoA+NAT Adsl Router User Manaul Bridge Mode Adsl Router User Manaul Problems with WAN Problems with LANProblems with Upgrading Glossary NAT Network Address Translation IP Address VPI Virtual Path Identifier & VCI Virtual Channel Identifier Adsl Router User Manaul Software SpecificationsVDC Hardware Adsl Router User Manaul Getting Client Certificate Server Setup for 802.1x ClientYes Appendix B Server Setup for 802.1x Client Adsl Router User Manaul
Related manuals
Manual 18 pages 13.82 Kb Manual 16 pages 3.39 Kb

RTA770W, RTA770 specifications

The Dynalink RTA770 is a versatile and powerful router designed to meet the demands of modern home and small business networking. Recognized for its reliability and performance, the RTA770 incorporates advanced technologies that enhance connectivity and overall user experience.

One of the main features of the RTA770 is its dual-band capability, offering simultaneous 2.4 GHz and 5 GHz frequency bands. The dual-band functionality allows for greater flexibility in network connections, reducing interference and optimizing performance. The 2.4 GHz band is ideal for devices like smartphones, tablets, and smart home devices that require a stable signal over longer distances. Conversely, the 5 GHz band caters to bandwidth-intensive activities such as online gaming, streaming high-definition videos, and video conferencing, providing faster speeds with reduced latency.

The RTA770 is equipped with the latest Wi-Fi 6 technology, which significantly boosts speed and efficiency. Wi-Fi 6, also known as 802.11ax, enhances wireless throughput, allowing multiple devices to connect simultaneously without compromising on performance. This is especially beneficial for households with numerous smart devices and users, ensuring a seamless online experience.

Security is a prominent consideration in the design of the RTA770. It features advanced encryption protocols, including WPA3, which offers improved protection against unauthorized access and ensures that personal information remains secure while browsing the internet. The router also supports guest network capability, allowing visitors to access the internet without exposing the primary network.

In terms of connectivity, the RTA770 boasts several ports including Gigabit Ethernet ports that facilitate wired connections for devices such as gaming consoles, smart TVs, and computers. This ensures optimal network performance for devices that require stable connections.

Furthermore, the Dynalink RTA770 includes an easy-to-use web interface for quick setup and management of network settings. Users can conveniently monitor connected devices, configure parental controls, and manage bandwidth allocation.

Overall, the Dynalink RTA770 stands out as a robust networking solution, combining dual-band performance, cutting-edge Wi-Fi 6 technology, enhanced security features, and user-friendly management tools. This makes it a compelling choice for both home users and small businesses looking to improve their network infrastructure.
Top Page Image Contents