Dynalink RTA770W user manual Management, Admin Account, Remote Access

Chapter 4: Web Configuration

Management

Admin Account

This page allows you to type in the password for accessing into your DSL Router.

For the Admin Account, the default setting for user password is admin. If you want to change the username and the password, please retype the new password in the Confirm field for confirmation. Then click Apply.

Remote Access

There are four interfaces for the remote access. Please choose one of them if you want to enable the remote access control.

Select the Internet Connect:

Select one connection item from the drop down list to enable the function.

Web Browser:

Choose this box if you want to have remote control through HTTP. The default port number will be shown in the box. Modify this number whenever you want.

Telnet:

Choose this box if you want to have remote control through telnet.

SNMP:

Choose this box if you want to have remote control through SNMP agent.

Ping:

Choose this box if you want to have remote control through ping command under DOS prompt.

61