9.8 Remote Sensor Monitoring
The CTM-130/132 modem has the ability to directly monitor and report readings from sensors connected to the modem’s input port. This provides a cost effective solution for temporary or remote location sites, and are often used as a backup to an existing monitoring system.
Chameleon Modem
Base Station
CDMA Netw ork
| | | |
Up to 6 sensors | | UDP messages |
eg | | | |
| | |
temperature | | | |
flow meter | | |
valve position | | | |
| | |
on/off status | | |
| | | |
Internet or Private Netw ork Group
Local Application
9.9 Using the Chameleon Viewer Windows® Software
The CTM-130/132 modem makes available to the host device a fixed format status report which may be viewed by the Chameleon Viewer Windows® application. The report is available anytime that the host computer has established a PPP session to the modem using a Dial-Up connection. For the CTM-132 modem equipped with a GPS receiver the current positional information is also available on the GPS tab.
© 2007 Cypress Solutions | Installation and Operation Manual: CTM-130 / CTM-132 (Revision 1.2) | Page - 34 - |
