Cypress CTM-130 manual Click Submit

Page 20

8.1.4 Configuring the Network Connection

Next it is necessary to load the CDMA network connection information into the modem. This is done from the Network page:

Enter the user name and password provided by the CDMA network carrier for this specific modem.

For a CDMA 1x connection the User Name is often of the form “number@1x.telusmobility.com” (where number is the telephone number allocated to this modem), and the Password is often the Electronic Serial Number (ESN) of this modem in decimal format (don’t forget any leading zeroes if these are part of the ESN). For a 1x connection the Dial Number is often #777.

For a Quick Net Connect (qnc) connection the User Name is usually qnc and the Password is also qnc. The Dial Number is often #888.

Select the network negotiation method: Simple IP only or Mobile IP preferred – this information will have been provided to you with the account information.

Click Submit.

The modem has now been configured to enable it to connect to the CDMA network. You may continue to configure the modem for your application or you may close this web browser session, shut-down the embedded web page DUN connection (by right clicking on the connection icon in the System Tray and select Disconnect) and go to the Modem Operation section to see how to start a CDMA network connection.

© 2007 Cypress Solutions

Installation and Operation Manual: CTM-130 / CTM-132 (Revision 1.2)

Page - 20 -

Image 20
Contents Installation E R a T I O N N U a L Contents Industrial Monitoring Operation Safety & regulatory notices Operation in hazardous environmentsOperation in or around aircraft Regulatory restrictionsElectromagnetic Interference EMI Canada Information Trademarks Cdma OverviewGPS Overview CTM-132 Product CTM-130/132 ProductCTM-130 Product CTM-130/132 Accessories Select Start Settings Control Panel Windows InstallationInstalling the Windows .inf file For Windows XP operating systems Physical Installation Mounting the CTM-130/132For standby Connecting the serial data cable Mounting and attaching the cell antennaConnecting to the I/O Port Mounting and attaching the GPS antennaOutput Connection Input ConnectionCypress Solutions Modem Configuration Embedded WebConnecting to the Embedded Web Activating the Modem Click Submit Configure the Communications Protocol Configure the I/O Operation Setup GPS Reporting Setup Input Reporting Advanced Configuration Options AT Commands AT$KWMODE=1Automatic Power Control Modem OperationPanel LED Indicators GPS OperationMaking a Cdma Network Connection Accessing the Embedded Web Pages Vehicle Dispatch Operation AVL Operation Industrial Monitoring Operation Using the Chameleon Viewer Windows Software Remote Sensor MonitoringTrouble shooting Solution Telus Mobility Data Support group 866.771.7292Technical Specifications ApprovalsSize