12CHAPTER 2: HARDWARE INSTALLATION
mounting holes
These slots fit over the heads of
1Remove the mounting template from this Guide.
2Place the mounting template against the wall at the location chosen for the cable modem. The template should be parallel to and at least 20 inches (50 cm) from the floor. Insert pushpins through the template cross hairs into the wall to mark the locations for the screws.
3Secure the mounting screws into the wall. Do not drive the screws flush to the wall. The screw head should be at least ¼” (6 mm) away from the wall so it can lock into the slots on the modem’s case.
4Fit the slots in the brackets on the modem’s underside over the screw heads and let the modem slide down into position.