Connecting the Cable Modem to Your Computer | 17 |
to an electrical outlet
to an analog | to a telephone |
| |
phone jack | to serial jack on |
| the cable modem |
■Plug a phone cord into the analog modem’s TELCO jack (marked with a 
on the bottom of the modem’s case) and a wall phone jack. If you purchased the TMX Dialup Kit, use the phone cord included with the analog modem. If you would like to use a phone on the same wall jack you intend to use with the analog modem, plug your phone’s cord into the jack marked with a 
on the bottom of the modem’s case. When you are finished making all of the necessary connections, your setup should resemble the following diagram.
power supply cable | phone outlet | |
(to wall outlet) | ||
|
U.S. | Robotics |
|
cable outlet
power supply cable (to wall outlet)
| ics |
U.S. | Robot |
3ComCable Modem | |
Com
3Turn the analog modem on. The power switch is located on the top front of the modem’s case.
4Turn your computer on. You are now ready to configure your Cable Modem TMX using our