Aztech Systems WL630PCI user manual

Page 12

User Manual

3.Click the “Identification” tab. Make up a name that is unique from the other computers' names on the network. Type the name of your workgroup, which should be the same used by all of the other PCs on the network.

4.Click the “Access Control” tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share level can be set to “User-level access control”.

5. When finished, restart your computer to activate the new device.

Page 12 of 24

Image 12

Contents WL630PCI Wireless B/G PCI Card FCC Certification Part15, Class BIntroduction to WL630PCI Wireless B/G PCI Card Package ContentsFeatures LED Indicators Power Indicator Green LEDAct Indicator Green LED Installation Install the Driver & UtilitySystem Requirements Click HereBelow screen will be shown. Click Next to continue Click Here Install the Device For Windows 98SE/MEFor Windows For Windows XP Verify Installation UninstallationGo to Start Æ Settings Æ Control Panel Æ Network Windows 98SE/MEPage Windows 2000/XP IP Address Configuration Utility Built-in Windows Zero Configuration Utility WZC You check the Configure using Windows Zero ConfigurationMain Tab Connect NoneAny WPA TLS Personal CertificateTo supply a Personal Certificate Medium-Low Power 12% Medium-Power 25%Medium-High Power 50% High Power 100%Profile Manager Tab NewEdit Information Tab Example of connection to an Access Point Click OK to exit the WEP Configuration