Aztech Systems WL630PCI user manual Click OK to exit the WEP Configuration

User Manual

7. The WEP Configuration screen will be shown.

8.Select Hexadecimal (Hex) if you are using hexadecimal numbers (0-9, or A-F). 10 Hexadecimal digits are needed if 64-bit WEP is used;

26 Hexadecimal digits are needed if 128-bit WEP is used; 58 Hexadecimal digits are needed if 256-bit WEP is used.

For example, the characters “1122aabbcc” are in 10 Hexadecimal digits.

9.Select ASCII if you are using ASCII characters (case-sensitive). ASCII characters are: 0,1,2,...8,9 and a,b,c,d,...x,y,z.

5 ASCII characters are needed if 64-bit WEP is used;

13 ASCII characters are needed if 128-bit WEP is used; 29 ASCII characters are needed if 256-bit WEP is used. For example, the characters “test1” are 5 ASCII keys.

10.Click OK to exit the WEP Configuration.

11.Click OK to exit the Profile Configuration and then click on Apply in the Main tab to activate the settings.

Page 24 of 24