Aztech Systems WL630PCI user manual IP Address

Page 14

User Manual

4 IP Address

1.To configure a dynamic IP address check the “Obtain an IP Address Automatically” option.

2.To configure a fixed IP, check the “Use the following IP address” option. Then enter an IP address into the empty field. For example, enter 192.168.1.1 in the IP address field and 255.255.255.0 for the Subnet Mask.

Note: When assigning IP Addresses to the computers on the network, remember to have the IP address for each computer set on the same subnet mask.

Page 14 of 24

Image 14
Contents WL630PCI Wireless B/G PCI Card FCC Certification Part15, Class BFeatures Introduction to WL630PCI Wireless B/G PCI CardPackage Contents Act Indicator Green LED LED IndicatorsPower Indicator Green LED System Requirements InstallationInstall the Driver & Utility Click HereBelow screen will be shown. Click Next to continue Click Here For Windows Install the DeviceFor Windows 98SE/ME For Windows XP Verify Installation UninstallationGo to Start Æ Settings Æ Control Panel Æ Network Windows 98SE/MEPage Windows 2000/XP IP Address Configuration Utility Main Tab Built-in Windows Zero Configuration Utility WZCYou check the Configure using Windows Zero Configuration Any WPA ConnectNone TLS Personal CertificateTo supply a Personal Certificate Medium-High Power 50% Medium-Low Power 12%Medium-Power 25% High Power 100%Edit Profile Manager TabNew Information Tab Example of connection to an Access Point Click OK to exit the WEP Configuration